Nghĩa của từ mass energy transfer coefficient bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: vật lý
-hệ số chuyển năng khối
Đặt câu có từ "mass energy transfer coefficient"
1. (F=quotient of the experimental and the theoretical mass transfer coefficient).
2. Structural element with a controllable heat-transfer coefficient u and active thermal mass
3. Convective Heat Transfer Coefficient
4. Mass Attenuation Coefficient and Conversion to Linear Attenuation Coefficient
5. Baffles increase the mixing of the liquid in the vessel, the mass transfer coefficient, as well as the available surface area for oxygen transfer at the air–liquid interface
6. Specific energy is energy per unit mass.
Năng lượng riêng (Tiếng Anh: specific energy) là năng lượng trên mỗi đơn vị khối lượng.
7. Limiting factor for the use of some single-use Bioreactors is the achievable oxygen transfer, represented by the specific mass transfer coefficient (k L ) for the specific phase area (a), resulting in the
8. A mass Attenuation coefficient can easily be converted to a linear Attenuation coefficient as discussed below
9. Energy efficiency Ratio (EER), Coefficient of Performance (COP)
10. Key words: dropshaft, mass transfer, aeration, hydraulics.
11. Relativity links mass with energy, and energy with momentum.
Thuyết tương đối liên kết khối lượng với năng lượng, và năng lượng với động lượng.
12. The skin friction coefficient, wall couple stress coefficient, displacement and momentum thicknesses and rate of heat transfer have been tabulated.
13. Convection is the transfer of internal energy into or out of an object by the physical movement of a surrounding fluid that transfers the internal energy along with its mass
14. Dark quenchers for donor-acceptor energy transfer
15. Energy transfer equipment for alcohol distillation alembics
16. COP (Coefficient of Performance) of the cooling equipment installed (kWh cooling energy produced/kWh energy used)
17. As can be seen, the constant of proportionality will be crucial in calculations and it is known as the Convective heat transfer coefficient, h.The Convective heat transfer coefficient, h, can be defined as:
18. Energy and mass are equal and interchangeable.
19. (Fluorescence resonance energy transfer (FRET), donor-acceptor interaction).
20. Higher heat transfer rate as air mass flow rate increases.
21. The measurement unit used for the mass Attenuation coefficient cm 2 g-1.
22. The convective heat transfer coefficient and pressure drop in ceramic foam structures are measured.
23. Since a linear Attenuation coefficient is dependent on the density of a material, the mass Attenuation coefficient is often reported for convenience.
24. For gravitational energy is negative, while rest mass and kinetic energy are positive.
25. The mass - energy equivalence has been amply confirmed.