Nghĩa của từ longitudinal tensile stress bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-ứng suất kéo trên phương dọc

Đặt câu có từ "longitudinal tensile stress"

1. Portable sander having novel abrasive sheet tensile stress

2. Longitudinal tensile forces from starting and acceleration, as well as compression from braking.

3. minimum elongation at fracture of the metal chosen under tensile stress in %.

4. As it only takes place under tensile stress, the plane of the Crazing …

5. A tensile stress opens the crack and pulls it through the slide resulting in fracture.

6. The compressive surface stress is tough in the glass because any bending load has to overcome quenched compressive stress before there's a net tensile stress on the surface.

7. Conversely, low to moderate tensile strain and stress is associated with direct repair, or intramembranous ossification.

8. 11 The condition of uniaxial stress is approximated in prismatic bars subjected to pure axial tensile.

9. Resonance of a finite elastic-plastic bar excited by longitudinal stress impulses of amplitudes smaller than the yield stress is studied.

10. Afterwards, the applied mechanical stress field is moved in the longitudinal direction of the groove.

11. 29 The condition of uniaxial stress is closely approximated in prismatic bars subjected to pure axial tensile.

12. The mechanical performance of Crazed polycarbonate was characterized by measuring the yield stress, elastic modulus, failure stress, and ductility for constant strain rate tensile tests.

13. 23 As with tensile and bend testing, torsion testing may be done under various stress or displacement programs.

14. Small probes of added shearing stress appeared to cause considerably more accumulated strain-hardening damage to a yield curve than small probes of added tensile stress.

15. CBM sealed condition is bad under neutral plane at axial part where shows tensile stress in syncline structure.

16. The effect of stacking parameters and fiber surface treatment on the longitudinal tensile properties of F-12/CF hybrid epoxy composites had been studied.

17. Testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture

18. A special test series investigated the effect on adhesion of a tensile or compressive stress state in a polyethylene pile.

19. Testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture;

20. (a) Testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture;

21. Circumferential or Hoop stress; Longitudinal stress; Circumferential or Hoop Stress: This is the stress which is set up in resisting the bursting effect of the applied internal pressure and can be most conveniently treated by considering the equilibrium of the cylinder

22. (a) testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture;

23. Jointless, curved trusses also show tensile stresses or compressive stresses perpendicular to the grain, depending on the stress distribution The test results of the respective specimens give indication as to the suitability of the admissible tensile stress of 2.5 kp/cm2 specified in the draft of DIN 1052.

24. Tensile stress from the adductor muscles is held to be responsible for the formation of the bone-blade described as linea alba.

25. 26 When the surface braided angle is bigger, the stress-strain curve shows bilinear relation and tensile failure presents brittleness damage, respectively.