Nghĩa của từ laser technique bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: toán & tin
-kỹ thuật laser
@Chuyên ngành kỹ thuật
@Lĩnh vực: toán & tin
-kỹ thuật lase
Đặt câu có từ "laser technique"
1. Interstitial laser coagulation technique . Executive summary.
2. 10 Interstitial laser coagulation technique . Executive summary.
3. Laser ultrasonic technique is used for contactless inspection of diffusion bonded steel parts.
4. Laser marking is a kind of technique using heat effect of laser to Ablate materials on object surface so as to leave over permanent press.
5. The chain is attached to the tooth with a laser-roughened pad applying the acid-etching technique.
6. Laser Blepharoplasty has been done for 15 years and several studies have documented the advantages of this technique
7. The contour may be effected by laser etching, micro-machining, optical thin-film coating or other such technique.
8. Results: The CO2 laser was found to produce craters of various dimensions, while the Nd:YAG laser produced honeycomb structures regionally similar to enamel samples from the acid-etch technique.
9. Space-time correlation analysis using Laser-Doppler Anemometry was chosen as the technique for investigating the turbulent flow field.
10. Results: The highest average tensile strength for the Nd:YAG laser was 4.1 MPa, with comparable values of 3.3 MPa for the CO2 laser and 4.9 MPa for the acid-etch technique.
11. Laser Doppler velocimetry, also known as laser Doppler Anemometry, is the technique of using the Doppler shift in a laser beam to measure the velocity in transparent or semi-transparent fluid flows or the linear or vibratory motion of opaque, reflecting surfaces.
12. The laser cutting technique used on these paper Cutouts is so incredibly precise, it results in beautiful and accurate paper embellishments
13. Chirped pulse amplification (CPA) is a technique for amplifying an ultrashort laser pulse up to the petawatt level, with the laser pulse being stretched out temporally and spectrally, then amplified, and then compressed again.
14. Selective laser sintering (SLS) is an additive manufacturing (AM) technique that uses a laser as the power source to sinter powdered material (typically nylon/polyamide), aiming the laser automatically at points in space defined by a 3D model, binding the material together to create a solid structure.
Thiêu kết laser chọn lọc (SLS) là một kỹ thuật sản xuất bồi đắp (AM) sử dụng một laser như nguồn năng lượng để thiêu kết vật liệu bột (như nylon / polyamide), định hướng laser tự động tại các điểm trong không gian nhờ một mô hình 3D, kết nối vật liệu lại với nhau để tạo ra một kết cấu vững chắc.
15. Laser anemometers, laser Doppler anemometers, laser Doppler Velocimeters (LDVs), laser radars (lidars) for wind speed measurement, laser based wind speed measurement apparatus, apparatus for measuring wind speed using Infra-Red (IR) radiation, optical fibre based laser anemometers, anemometers, ground based laser anemometers, vehicle mountable laser anemometers, buoy mountable laser anemometers, ship mountable laser anemometers, aircraft mountable laser anemometers, airborne laser anemometers, laser anemometers for true air-speed measurements, laser anemometers for air turbulence measurements, laser anemometers for measuring wind speed in a wind tunnel and wind turbine mountable laser anemometers
16. Our BOAT-MAP technique combines the benefits of multibeam Bathymetry with above-water laser scanning to produce a seamless image of the coastal
17. Collimating lenses product line: Laser Collimating lens, Laser collimation lens, Laser collimator lens
18. China best China laser machines with good quality and high speed from Bogong MACHINERY, Bogong is a China manufacturer of laser marking machine, CO2 laser engraving and cutting machine, fiber laser cutting machine, and laser welding machine, Laser celeaning machine, laser welding machine, and metal laser engraving machine
19. Performing the laser ablation in the deeper corneal stroma provides for more rapid visual recovery and less pain than the earlier technique, photorefractive keratectomy (PRK).
Thực hiện laser cắt bỏ trong chất nền giác mạc sâu hơn thường cung cấp cho phục hồi hình ảnh nhanh chóng hơn và ít đau hơn so với kỹ thuật trước đó, keratectomy chiết quang (PRK).
20. Laser induced breakdown spectroscopy (LIBS) has been shown to be a promising technique for element analysis. However, self-absorption effect deeply influences the LIBS measurements.
21. Beamin Lasers Laser light shows, laser rentals/purchases and the best laser services in Phoenix Arizona
22. constitutes or incorporates a laser or laser system and during operation permits access to laser radiation;
23. Laser therapy device, control method for laser therapy device, and hand piece device for laser therapy device
24. Laser ablations
25. Laser “scalpels.”
“Dao mổ” laser.