Nghĩa của từ joint (metal) bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-mối hàn
@Lĩnh vực: cơ khí & công trình
-mối nối kim loại

Đặt câu có từ "joint metal"

Dưới đây là những mẫu câu có chứa từ "joint metal", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ joint metal, hoặc tham khảo ngữ cảnh sử dụng từ joint metal trong bộ từ điển Từ điển Anh - Việt

1. Definition of Brazing Brazing is a metal-joining process in which the base metal is not melted, but joint obtained by melting of filler metal

2. A Cruciform joint is a specific joint in which four spaces are created by the welding of three plates of metal at right angles.

3. 33 rows  · Brazing is a metal -joining process in which two or more metal items are joined together by melting and flowing a filler metal into the joint, with the filler metal having a …

4. We’ve said that a Brazed joint “makes itself”—or that capillary action, more than operator skill, insures the distribution of the filler metal into the joint.

5. Ultrahigh-strength gas metal arc welded joint having excellent impact toughness, and solid wire for producing same

6. Junctions, Joint packings, Connectors, Grab rings,Couplings (not of metal) for water hoses for irrigation and/or gardening

7. Brazing is a process in which metals are joined by melting a filler metal into the joint to create strong permanent bonds. Brazing requires a small joint spacing to allow capillary action to draw the filler metal into the joint when the parts reach the proper phase temperature above 840°F (450°C).

8. The joining device includes first and second elongated metal joint bars for holding the abutting ends of the rails together.

9. In short, welding is a technique that joins metals by melting the base metal and causing fusion, while Brazing joins metals by melting and flowing a filler metal into the joint.

10. Backing is defined as material placed at the root of a weld joint for the purpose of supporting molten weld metal

11. The hardness of fusion zoon higher weld joint and lower base metal The hardness have no change at fusion depth direction.

12. The Ankle joint is both a synovial joint and a hinge joint

13. Metal seals, metal oil seals, metal shims, metal ring seals, metal washers, metal gasket rings

14. Similar to soldering, Brazing creates an extremely strong joint, usually stronger than the base metal pieces themselves, without melting or deforming the components.

15. Since in Brazing filler metal is always used and generally the complete joint area is heated simultaneous, Brazing is quite a robust process

16. In length, Actuating a universal joint on the first spindle of the register; it consisted of an air-tight thin metal tube with a coned fore-end, carrying flat metal vanes set at an angle.

17. Liners of metal, oil seals of metal, metal gaskets, metal seal rings, metal oil retainers

18. First, a Brazed joint is a strong joint

19. These included a dovetail joint, a mortise and tenon joint and a dowelled joint.

20. What is Alleviate Joint Formula? Alleviate Joint Formula is an all-natural dietary supplement that claims to enhance joint functioning and joint health.

21. The Ankle joint (or talocrural joint) is a synovial joint located in the lower limb

22. joint press statements in the case of joint actions;

23. The hip joint is a ball-and-socket joint.

24. Alleviate Joint Formula is designed to remove joint stiffness and calm joint pain from the root

25. Joint operation?

" Đồng cam cộng khổ " đại ca.