Nghĩa của từ interaminar shear strength bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: hóa học & vật liệu
-cường độ trượt liên lớp
-độ bền trượt liên lớp

Đặt câu có từ "interaminar shear strength"

Dưới đây là những mẫu câu có chứa từ "interaminar shear strength", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ interaminar shear strength, hoặc tham khảo ngữ cảnh sử dụng từ interaminar shear strength trong bộ từ điển Từ điển Anh - Việt

1. Pressure-sensitive adhesive composition having high shear strength

2. The adhesive compositions improve dynamic shear strength, dynamic peel strength, as well as static peel strength.

3. Strength (ucs) of carbonates using compressional and shear acoustic velocities

4. In general, increasing Asperity density will increase shear strength performance.

5. Pressure-sensitive adhesives exhibiting an improved shear strength at elevated temperatures

6. A tacky acrylic adhesive with low shear strength can be used.

7. Key words: Ground improvement, undrained shear strength, consolidation, stress path, settlement.

8. Furthermore, factors such as stiffness or shear and torsional strength may be more important than bending strength.

9. The composition gives a cured article improved in tensile strength, tensile shear bonding strength, and adhesion to various adherends.

10. Key words: landslide, till, correlation, stratigraphy, back analysis, shear strength, residual, aerial photographs.

11. Shear fatigue of the bracket-adhesive complex for 1,000 cycles revealed a variable, material-dependent influence on the shear strength of the bracket-adhesive complex.

12. The method produces a pressure-sensitive adhesive with balanced peel adhesion, shear strength and conversion.

13. • Develop methods and devices to better predict the ultimate strength of tension, bending, shear and compression.

14. 29 The results show that the shear strength of COF is higher than that of COG.

15. Key words: beam-column connection, database, earthquake-resistant design, finite element analysis, reinforced concrete, shear strength, stirrups.

16. Key words: bored pile design, side resistance, matera clay, reliability-based design, undrained shear strength, adhesion factor.

17. 43 rows  · The Cohesion is a term used in describing the shear strength soils

18. Test results allowed for a correlation between mineralogy and drained shear strength for aggregates of various particle size.

19. Consideration is given to strength phenomena of commercial timber alone and in reinforced sections in bending and shear.

20. After bonding the brackets with a mix adhesive, they were thermocycled and then the shear bonding strength established.

21. Key words: ocean soil, sand, shear strength, pile, model test, bearing capacity, friction, uplift, active and passive earth pressures.

22. Shear bond strength was tested after bracket bonding, and the Adhesive Remnant Index (ARI) scores were quantified after debonding.

23. Wettability measurements on sanded wood surfaces and strength tests on shear test specimens were used to assess the ability of the sanding treatment to improve adhesive performance. The effect of sanding on wettability and shear strength varied according to the abrasiveness of the sanding treatment.

24. Formaldehyde-free cornstarch plus tannin adhesives were evaluated for mechanical and physical properties (shear strength, rheological characterisation and thermogravimetric analysis).

25. Behzad Abasht Grade 5 titanium is the most widely used titanium alloy, but it has low tensile and shear strength