Nghĩa của từ inlet pressure bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-áp lực đầu vào
-áp suất hút
-áp suất hút vào
@Lĩnh vực: cơ khí & công trình
-áp lực tại cửa vào
-áp suất nạp vào
@Lĩnh vực: điện lạnh
-áp suất (lối) vào
-áp suất ở cửa vào
@Lĩnh vực: điện
-áp suất hơi vào

Đặt câu có từ "inlet pressure"

Dưới đây là những mẫu câu có chứa từ "inlet pressure", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ inlet pressure, hoặc tham khảo ngữ cảnh sử dụng từ inlet pressure trong bộ từ điển Từ điển Anh - Việt

1. Pp = absolute pump inlet pressure (kPa

2. Inlet pressure drop (): ... kPa in the engine

3. Gas flow is a function of inlet pressure and temperature, pressure drop between the SSV inlet and throat.

4. This means any machine which compresses air, gases or vapours to a pressure higher than the inlet pressure.

5. To determine the range of critical flow, Kv shall be plotted as a function of venturi inlet pressure.

6. Any machine for use with interchangeable equipment which compresses air, gases or vapours to a pressure higher than the inlet pressure.

7. Any machine for use with interchangeable equipment which compresses air, gases or vapours to a pressure higher than the inlet pressure

8. A damping piston (50) abuts said inlet pressure sensing portion of the piston in order to minimize transient piston motion or chatter.

9. Attach these valves to Acetylene, hydrogen, methane, propane, or propylene tanks to reduce a high inlet pressure to a lower, stable outlet pressure

10. If the inlet pressure is high enough, the flow rate, which is adjusted by means of the critical flow orifice, is independent of the orifice outlet pressure (critical flow).

11. If the inlet pressure is high enough, the flow-rate (q), which is adjusted by means of the critical flow orifice, is independent of orifice outlet pressure (critical flow).

12. If the inlet pressure is high enough, the flow rate, which is adjusted by means of the critical flow orifice, is independent of the orifice outlet pressure (critical flow

13. If the inlet pressure is high enough, the flow-rate (q), which is adjusted by means of the critical-flow orifice, is independent of orifice outlet pressure (critical flow).

14. If the inlet pressure is high enough, the flow rate, which is adjusted by means of the critical flow orifice, is independent of the orifice outlet pressure (≡ critical flow

15. If the inlet pressure is high enough, the flow rate, which is adjusted by means of the critical flow orifice, is independent of the orifice outlet pressure (≡ critical flow).

16. If the inlet pressure is high enough, the flow-rate (q), which is adjusted by means of the critical flow orifice, is independent of orifice outlet pressure (critical flow

17. If the inlet pressure is high enough, the flow rate, which is adjusted by means of the critical flow orifice, is independent of the orifice outlet pressure (� critical flow).

18. The effects of mass flow rate, inlet liquid temperature and heat input on the amplitudes and periods of inlet pressure and thermal oscillations are presented in tabular and graphical forms.

19. Product Description Type T205B balanced tank Blanketing regulator (Figure 1) is a direct-operated regulator with fully balanced plug design to reduce inlet pressure sensitivity and with large diaphragm to accurately control tank pressure at low pressure settings on tank Blanketing systems