Nghĩa của từ injection pump bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-bơm nhiên liệu (cao áp)
-bơm phun
-bơm phun (nhiên liệu)
-máy bơm phun
@Lĩnh vực: giao thông & vận tải
-bơm cao áp
@Lĩnh vực: ô tô
-bơm cao áp (heo dầu)
@Lĩnh vực: hóa học & vật liệu
-bơm tiêm phun
@Lĩnh vực: cơ khí & công trình
-máy bơm phụt dung dịch

Đặt câu có từ "injection pump"

Dưới đây là những mẫu câu có chứa từ "injection pump", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ injection pump, hoặc tham khảo ngữ cảnh sử dụng từ injection pump trong bộ từ điển Từ điển Anh - Việt

1. Injection pump/ pressure regulator

2. Three-way valve of accumulator distributing type fuel injection pump

3. This article centers on studies of lubricity on injection pump by nano - Cu additive.

4. Heavily used oil may be highly acidic and corrode the inside of the injection pump.

5. (7) The air intake valve is the control valve for the pneumatic governor of the injection pump.

6. 4 The air intake valve is the control valve for the pneumatic governor of the injection pump.

7. e The air intake valve is the control valve for the pneumatic governor of the injection pump.

8. (5) The air intake valve is the control valve for the pneumatic governor of the injection pump.

9. (3) The air intake valve is the control valve for the pneumatic governor of the injection pump.

10. b) The engine shall be operated at full load setting of the injection pump at minimum mapping speed

11. (b) the engine shall be operated at full load setting of the injection pump at minimum mapping speed;

12. (b) The engine shall be operated at full load setting of the injection pump at minimum mapping speed.

13. b) the engine shall be operated at full load setting of the injection pump at minimum mapping speed

14. (b) The engine shall be operated at full load setting of the injection pump at minimum mapping speed;

15. Servo-motor (14") for auxiliary devices of the internal combustion engine, for example to regulate the injection time point of the injection pump, of which the regulation unit (14) is actuable by the rotation speed-dependent force and operating from the fly-balls (1) of the rotation speed regulator on the abutment (7) of the spring mechanism (6).