Nghĩa của từ idle speed or idling speed bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: ô tô
-tốc độ cầm chừng
Đặt câu có từ "idle speed or idling speed"
1. engine idling speed
2. No need to adjust idle speed.
3. � e.g. vehicle speed / engine speed / calculated load, ambient temperature, elevation, idle operation, or time of operation.
4. Process for adjusting the idling speed of an internal combustion engine
5. The idling speed of the engine during the idling period must be adjusted in accordance with the manufacturer's instructions.
6. 2.6. The idling speed of the engine during the idling period must be adjusted in accordance with the manufacturer's instructions.
7. Each elementary urban cycle comprises fifteen phases (idling, acceleration, steady speed, deceleration, etc.).
8. The extra urban cycle comprises 13 phases (idling, acceleration, steady speed, deceleration, etc.).
9. Each elementary urban cycle comprises 15 phases (idling, acceleration, steady speed, deceleration, etc.).
10. The test sequence shall be started, if the engine has reached idle speed.
11. Additionally, the motor is running at idling speed for 40 seconds before these two pre-conditioning cycles.
12. Engine idling unloaded, fan at normal speed, auxiliary equipment with normal load, brake air compressor not operating .
13. Measurement of exhaust gas opacity with free acceleration (no load from idling up to cut-off speed).
14. This also applies, in particular, to the idling speed adjustment (rotating speed and carbon monoxide content of exhaust gases), to the automatic choke and to the exhaust gas clean-up system.
15. Backstops can be classified either for low-speed or high-speed use
16. Tools which may be used to control components for adjusting the idling speed: screwdrivers (ordinary or cross-headed), spanners (ring, open-end or adjustable), pliers, Allen keys.
17. 2.5.1.1. Tools which may be used to control components for adjusting the idling speed : screwdrivers (ordinary or cross-headed), spanners (ring, open-end or adjustable), pliers, Allen keys.
18. Then the throttle control shall be rapidly released and the engine speed shall be returned to idle.
19. Tools which may be used to control components for adjusting the idling speed: screwdrivers (ordinary or cross-headed), spanners (ring, open-end or adjustable), pliers, Allen keys
20. When a constant engine speed is reached, the throttle must be returned swiftly to the idle position.
21. Comer Gearboxes speed increasing or reducing
22. Comer Gearboxes speed increasing or reducing
23. Pitot static:altimeter, air speed indicator, vertical speed indicator;
24. Distance/speed meter and distance/speed measurement method
25. Jinan High - speed , high - speed Huang, with three high - speed , cross - territory Jiaoji railway, transport facilitation.