Nghĩa của từ horizontal reference plane bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-mặt chuẩn nằm ngang

Đặt câu có từ "horizontal reference plane"

Dưới đây là những mẫu câu có chứa từ "horizontal reference plane", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ horizontal reference plane, hoặc tham khảo ngữ cảnh sử dụng từ horizontal reference plane trong bộ từ điển Từ điển Anh - Việt

1. The horizontal plane through the upper edge of the guiding device is the reference datum.

2. Angle of visibility in the horizontal plane: ...

3. Angle of visibility in the horizontal plane

4. Angle of the visibility in the horizontal plane

5. Mustard exists, just like tomato sauce, on a horizontal plane.

Mù tạc, cũng như nước sốt cà chua, tồn tại trên một mặt phẳng ngang.

6. P4 - a plane containing straight line OQ and forming an angle of 8o below the horizontal plane.

7. P3 - a plane containing right angle OQ and forming an angle of 10o above the horizontal plane;

8. P#-a plane containing straight line OQ and forming an angle of #o below the horizontal plane

9. Azimuths are horizontal angles measured clockwise from any reference meridian

10. P#-a plane containing right angle OQ and forming an angle of #o above the horizontal plane

11. a plane passing through the straight line OQ and forming an angle of 10° above the horizontal plane,

12. a plane passing through the straight line OQ and forming an angle of 10° above the horizontal plane;

13. a plane passing through the straight line OQ and forming an angle of 10o above the horizontal plane,

14. a plane passing through the straight line OQ and forming an angle of 8o below the horizontal plane.

15. a plane passing through the straight line OQ and forming an angle of 8° below the horizontal plane.

16. A plane passing through the straight line OQ and forming an angle of 8° below the horizontal plane.

17. A plane passing through the straight line OQ and forming an angle of 10° above the horizontal plane;

18. The plane dropped lower, returning to the horizontal, and the airfield appeared.

19. P4 - a plane passing through the straight line OQ and forming an angle of 8° below the horizontal plane.

20. P3 – a plane passing through the straight line OQ and forming an angle of 10° above the horizontal plane,

21. P3 - a plane passing through the straight line OQ and forming an angle of 10° above the horizontal plane,

22. Abscissa is the value of the horizontal axis on a coordinate plane.

23. The definition of an Abscissa is the horizontal coordinate on a geometric plane

24. The Barlines are drawn as horizontal reference lines in red and blue

25. The level device is adapted to define a reference plane.