Nghĩa của từ glass transition bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: điện lạnh
-chuyển pha thủy tinh
Đặt câu có từ "glass transition"
1. Its low glass transition temperature makes it easier to Anneal
2. A glass transition of the ground amorphous solid was found by DSC.
3. Racemic and regular PLLA has a low glass transition temperature, which is undesirable.
Racemic và PLLA thường xuyên có nhiệt độ chuyển tiếp thủy tinh thấp, điều không mong muốn.
4. Plasticized films based on polyvinyl acetal having an increased glass transition temperature and improved flow properties
5. The monomer (b): an olefin homopolymer having a glass transition temperature of 50 ̊C or lower.
6. A stereocomplex of PDLA and PLLA has a higher glass transition temperatures, lending it more mechanical strength.
Stereocomplex của PDLA và PLLA có nhiệt độ chuyển tiếp thủy tinh cao hơn, cho nó sức mạnh cơ học lớn hơn.
7. Have a “glass transition”) at a certain temperature (221 degrees Fahrenheit in the case of ABS plastic).
8. Have a “glass transition”) at a certain temperature (221 degrees Fahrenheit in the case of Abs plastic).
9. Regrind PET material is also dried with dry air at a temperature below the glass transition temperature.
10. Amorphous solids: What is the nature of the glass transition between a fluid or regular solid and a glassy phase?
11. The Copolymers have good impact resistance and glass transition temperatures while maintaining high melt flow and a high limiting oxygen index.
12. 9 In this article,[www.Sentencedict.com] the glass transition temperature of a single polyoxymethylene(POM) chain adopting the modified bond fluctuation model was studied.
13. The shape of βa-absorption curve of PCP was as broad as that of PVC at temperatures much lower than each glass transition temperature.
14. The glass transition temperature of the amorphous polymer is greater than the melting point of the sealant material by at least about 45 degrees centigrade.
15. The shape of αa-absorption curve of PVC was as sharp as that of PVC at the temperature range much higher than each glass transition temperature.
16. From the frequency dependence of the glass transition temperature on enthalpy and entropy of activation is determined. These qualities are used for the discussion of the results.
17. Curing characteristics include items such as pot life and thin film cure speed, while thermoset performance includes items such as hardness, glass transition temperature, and tensile strength
18. The mechanical damping tests show, that with increasing hexa-content the glass transition range of the mixture is shifted to lower temperature, whereas the absorption maximum becomes smaller.
19. Calorimetric testing of a material is a measuring technique which assesses the thermal characteristics of materials through the observation of phenomena such as glass transition or phase-change
20. In case of theα-absorption observed in elastic state, the time-temperature superposition principle is usually applicable at temperatures much higher than the so-called glass transition temperature.
21. The intermediate film (2) for laminated glass according to the present invention contains a polyvinyl acetal resin and a second resin component having a glass transition temperature of -15oC to 5oC.
22. Crystallite Crystallites act to stiffen and reinforce the bulk material, and extend the stiffness and strength properties of a material well above the glass transition temperature until the Crystallite melting point (Tm) is reached
23. The matrix system comprises a carrier and a self-adhesive matrix and is characterised in that said matrix includes (a) 55-75 parts by weight of an adhesive acrylate copolymer with a glass transition temperature of -70 to -10 °C, (b) 5-15 parts by weight of a cationic acrylate copolymer with a glass transition temperature of 20-80 °C, (c) 5-15 parts by weight of ibuprofen in free acid form, and (d) 10-25 parts by weight of diethyl phthalate.
24. In particular, rod-coil block copolymers that comprise an electron-donor semiconducting block and a wisely chosen coil block (e.g. a low glass-transition temperature polymer) were synthesised and blended with well-established donor/acceptor organic materials.
25. The HIPE foam has a Toughness Index of at least 75 where the Toughness Index relates properties related to durability (e.g., density, tan[$g(d)] height, glass transition temperature, and abrasion resistance) into a single composite descriptor thereof.
26. The DSC results showed that the compound, a colorless wax at room temperature, was amorphous with a glass transition temperature which was 80° higher than those of aliphatic crown ethers, which are crystalline compounds with melting points >40°C.
27. The invention relates to rubber mixtures containing diene rubbers which contain 0.1 - 2 wt. % primary hydroxyl groups and have a glass transition temperature of -120 to -50 °C. The invention also relates to mixtures comprising filling materials, optionally other rubbers and rubber adjutants and vulcanizates produced therefrom.
28. The present invention relates to: a carboxylic acid modified nitrile based copolymer latex composition characterized by comprising a carboxylic acid modified nitrile based copolymer latex having a glass transition temperature of -30°C to -20°C and a bentonite dispersion; and a dip molded product comprising the same.
29. A lyophilized anti-fungal composition comprises (A) caspofungin, or a pharmaceutically acceptable salt thereof, in an effective amount; (B) one or more non-reducing sugars having a glass transition temperature Tg(s) of at least about 90°C; and (C) an acetate buffer in an amount effective to provide a pH in a range of from about 5 to about 7; wherein the weight ratio of the one or more non-reducing sugars to caspofungin is in a range of from about 1.1:1 to about 10:1; the composition has a moisture content of about 0.8 wt.% or less; and the composition has a glass transition temperature Tg(c) of at least about 55°C.
30. For sound conduction through solids, the sound insulation and absorption of the material are important criteria and this is a function of the density and elasticity of the material. The acoustic properties of plastics, when plotted over broad ranges of frequencies and temperature, are usually determined by the glass transition temperatures of the particular plastic material.
31. The methods include (i) depositing a primer layer having a coefficient of thermal expansion of 300 to 600 μm/mino°C measured at a temperature range below the glass transition temperature of the primer layer, wherein the primer layer has a film thickness of at least 1 micron and is formed from a thermoplastic acrylic composition, and (ii) depositing the hard coat over at least a portion of the primer layer, wherein the hard coat has a thickness of at least 2 μm and is formed from a composition comprising an alkoxide.
32. This retardation film comprises: a cellulose ester which has a total degree of substitution with acyl groups of 2.0-2.55 and in which when the common logarithm of the absolute molecular weight Mw(a), log[Mw(a)], obtained through analyses by gel permeation chromatography (GPC), low angle laser light scattering (LALLS), and viscosity measurement, is plotted as abscissa and the common logarithm of the intrinsic viscosity Iv(a), log[Iv(a)], obtained through the analyses is plotted as ordinate, the plot has a slope of 0.65-0.85; and a glass-transition-temperature lowering agent having an SP value of 9.0-11.0.