Nghĩa của từ gear-ratio bằng Tiếng Việt

@gear-ratio /'giə'reiʃiou/
* danh từ
- (kỹ thuật) số truyền động

Đặt câu có từ "gear-ratio"

Dưới đây là những mẫu câu có chứa từ "gear-ratio", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ gear-ratio, hoặc tham khảo ngữ cảnh sử dụng từ gear-ratio trong bộ từ điển Từ điển Anh - Việt

1. Adaptive transmissions and transmissions with variable gear ratio

2. || Determination of the anchor point for each gear ratio

3. if one specific gear ratio gives an acceleration in a tolerance band of ± 5 % of the reference acceleration awot ref, not exceeding 2,0 m/s2, test with that gear ratio.

4. if one specific gear ratio gives an acceleration in a tolerance band of ± 5 % of the reference acceleration awot ref, not exceeding 2,0 m/s2, test with that gear ratio,

5. || Vehicles with automatic transmissions, adaptive transmissions and transmissions with variable gear ratio (CVTs)

6. (a) if one specific gear ratio gives an acceleration in a tolerance band of ± 5 % of the reference acceleration awot ref, not exceeding 2,0 m/s2, test with that gear ratio.

7. Vehicles with automatic transmissions, adaptive transmissions and transmissions with variable gear ratio (CVTs)

8. Vehicles with automatic transmissions, adaptive transmissions and transmissions with variable gear ratio (CVTs

9. M-105R - (1,100 horsepower (820 kW)) Decreased propeller reduction gear ratio for bomber aircraft.

10. In case of non-locked transmission conditions, the test may include a gear ratio change to a lower range and a higher acceleration.

11. Tests in acceleration shall be carried out and the acceptance criteria verified for each gear ratio allowing in theory Vadj* to be achieved.

12. Tests in acceleration shall be carried out and the acceptance criteria verified for each gear ratio allowing in theory Vadj* to be achieved

13. Tests in acceleration shall be carried out and the acceptance criteria verified for each gear ratio allowing in theory Vadj* to be achieved.”

14. Tests in acceleration shall be carried out and the acceptance criteria verified for each gear ratio allowing in theory the set speed to be exceeded.

15. Tests in acceleration shall be carried out and the acceptance criteria verified for each gear ratio allowing in theory the set speed to be exceeded

16. Even with changing the RCMC board to one with a different gear ratio the Chuffs are not a full 90 degrees apart during a driver revolution.

17. Write Analytically the solution of the position analysis of the gear-connected five-bar mechanism with the vector circuit equations given the dimensions, gear ratio and phase angle expressions in the figure

18. Proper Camshaft selection is a combination of first and foremost, your experience coupled with the determined usage; engine displacement, compression ratio, fuel system carbureted or injected, RPM range power desired, transmission type/converter stall speed, vehicle weight, final gear ratio, tire height, cylinder head and valves, head flow

19. The transmission further comprises: gear change linkages (50, 50') connected between the driving pulley and the driven pulley for adjusting a gear ratio by axially translating each of the conical wheels constituting the driving pulley and the driven pulley; and a gear change actuator (60) connected to the gear change linkages (50, 50') for receiving a gear change input from the outside and actuating the gear change linkages (50, 50').