Nghĩa của từ friction angle bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-góc ma sát

Đặt câu có từ "friction angle"

Dưới đây là những mẫu câu có chứa từ "friction angle", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ friction angle, hoặc tham khảo ngữ cảnh sử dụng từ friction angle trong bộ từ điển Từ điển Anh - Việt

1. The effects of soil friction angle, wall inclination, wall friction angle, amplification of vibration, and horizontal and vertical earthquake acceleration on the active earth pressure have been explored in this study.

2. Key words: statistics, probability, ultimate bearing capacity, allowable bearing capacity, shallow foundations, friction angle, numerical methods.

3. The total friction angle (arctanτ/σn) at which sliding occurs provides an estimate of the joint roughness coefficientJRC.

4. Key words : probability, sheet-pile wall, active and passive pressure, friction angle, safety factor, safety margin, reliability index.

5. The friction angle is determined from stresses which are calculated from external loads and the nominal contact area.

6. The results show as the moisture increased, the internal friction angle and cohesive strength decrease with shearing strength reduced, which is the prime reason of the slope.

7. The structural models allow a classification into different types of deformation behaviour of the slopes. Criteria of classifications are the inclination of the strata and the friction angle.

8. The influences of the parameters such as elastic modulus of rock, cohesive strength and friction angle of slide surface, thickness and angle of rock layer on the critical length were studied.

9. An analytical solution is developed to determine the active lateral earth pressure distribution on a retaining structure when it consists of a cohesive backfill (internal friction angle f > 0, cohesion c > 0) with an inclined ground surface.

10. To Characterize the shear softening deformation of the grain contact: (5) τ = u s k si 1 + u s k si / τ S τ < c + σ n tanφ σ n tanφ when slipping where τ, u s, τ S, k si, c, and φ denote the shear stress, shear displacement, parameter controlling nonlinear shear deformation, initial shear stiffness, cohesion, and friction angle of the