Nghĩa của từ flat edge and bevel bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-mép phẳng và mặt vát
@Chuyên ngành kỹ thuật
-mép phẳng và mặt vát

Đặt câu có từ "flat edge and bevel"

Dưới đây là những mẫu câu có chứa từ "flat edge and bevel", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ flat edge and bevel, hoặc tham khảo ngữ cảnh sử dụng từ flat edge and bevel trong bộ từ điển Từ điển Anh - Việt

1. Bevel Edge Chisels Mortise Chisels Fishtail Chisels Corner Chisels Chisel Handles 1 to 11 of 11 results for Chisels Bevel Edge Socket Chisels $55.00 - $85.00 7/16" Bevel Edge Socket Chisel $55.00

2. Bevel edged What used to be called German Style Shears (scissors) or Barber Scissors are typically designed with a beveled edge and a flat blade

3. Carvers put a bevel on both sides of the edge.

4. Chamfer Bits - cut a bevel on the edge of a workpiece

5. Add Gradient Overlay to avoid flat color and Bevel and Emboss to give it three-dimensional appearance.

6. ‘Standard redwood patterns include: tongue & groove, Bevel, rabbeted Bevel, shiplap, channel shiplap and V shiplap.’ ‘The older picture showed an aluminium-hued casing with rounded corners and a screen Bevel sloping away to the edge of the unit.’

7. 28 Add Gradient Overlay to avoid flat color and Bevel and Emboss to give it three-dimensional appearance.

8. The lower edge (10) of the outer bushing (6) also has an inwardly extending bevel (5).

9. The edge of the disc had been machined flat/smooth.

10. A broadaxe is a large-(broad) headed axe.There are two categories of cutting edge on Broadaxes, both are used for shaping logs by hewing.On one type, one side is flat and the other side beveled, a basilled edge, also called a side axe, single bevel, or chisle-edged axe

11. Bevel is the more common term out of bevel and Chamfer.

12. The mandibles are powerful, with Bevelled tips and three or four teeth on the edge of the bevel. MORE HUNTING WASPS J

13. Abrasion may be classified as flat Abrasion, edge Abrasion or flex Abrasion

14. Bevatrons beveil beveiled bevel: bevel gear bevel gears bevel square beveled beveler bevelers beveling bevelings bevelled bevelled anastomosis: Literary usage of Bevatron

15. Clipped to fit where standard washers can't, these won't rotate when you position the flat edge against a flat surface.

16. The Backsword is so called because the triangular cross section that gives a flat back edge opposite the cutting edge

17. Relatively small microbevel widths at a 30° bevel angle completely prevented edge and corner breakage of carbide tools with rake angles up to 50.

18. Add Bevel and Emboss and Gradient Overlay.

19. As adjectives the difference between bevelled and Bevilled is that bevelled is having a bevel, especially at an edge while Bevilled is (heraldry) notched with an angle like that enclosed by a carpenter's bevel; said of a partition line of a shield

20. During cross cutting with the chipper-type saw chain also the front and the rake bevel angle of the edge perceptibly affect the feed- and the cutting forces.

21. It is available in these glaze palettes: Flat: (G, M, C, P, S) 3×8 long-edge and short-edge Bullnoses are shown here in Milk gloss glaze

22. 15 Add Bevel and Emboss and Gradient Overlay.

23. Any wearer of Bevel Specs designer eyewear will feel the clean, minimalist, and colorful aura of Bevel Specs eyewear.

24. The Dolly Varden Rabbeted Bevel profile is an easier install while providing the same traditional Bevel style and appearance.

25. This combination provides the image without chromatic aberrations and completely flat field of view with sharp stars to the edge.