Nghĩa của từ expanded sheet metal bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-lưới thép co giãn được
@Chuyên ngành kỹ thuật
-lưới thép co giãn được

Đặt câu có từ "expanded sheet metal"

Dưới đây là những mẫu câu có chứa từ "expanded sheet metal", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ expanded sheet metal, hoặc tham khảo ngữ cảnh sử dụng từ expanded sheet metal trong bộ từ điển Từ điển Anh - Việt

1. Glass paper, sandpaper, abrasive sheet metal, metal covered with an abrasive coating, metal sheet covered with an abrasive coating

2. Metal guard rails, sheet piling

3. Pre-painted sheet metal, namely, corrosion-resistant sheet metal pre-painted to simulate naturally weathered steel

4. Wall boards (not of metal) sheet piles (not of metal)

5. The second sheet metal angle (3) is excited through radiation coupling by the first sheet metal angle (2).

6. Heavy metal adsorption-removing method using expanded vermiculite

7. Chutes of metal, security grilles of metal, pre-fabricated ditches of sheet metal

8. Polyfoam (expanded polystyrene) sheet , Nails , Circles abrasive , Glass fiber , Welding electrodes .

9. Walls and sheet piling, not of metal

10. Atlas Blowpipe & Sheet Metal Works INC

11. Find Aluminum sheet metal at Lowe's today

12. Printing machines for use on sheet metal

13. 74.12 * Expanded metal , of copper * * Manufacture in which the value

14. Bending sheet metal by hand is a manageable task if the piece of sheet metal is small and thin enough to handle

15. Sheet Metal Work & Welded Part: Bus Chassis, Welded Frame...

16. He hammered out the dents in the metal sheet.

17. Sheet metal bands of zinc, copper, stainless steel, aluminium

18. Light metal profile with integrated base sheet metal for producing an acoustically optimized diffraction edge

19. Adapter plates, sheet metal parts of aluminium and stainless steel

20. Causes of Sharp Edges and Burrs on Sheet Metal Parts

21. The sheet metal Bending height should be at least 2 times the thickness of the sheet metal plus the Bending radius, that is, H ≥ 2t + R.

22. Wide choice of plastic, stainless steel, aluminium or whitevarnished sheet metal.

23. Bending is one of the most common sheet metal fabrication operations

24. Bucking bars are essential for riveting and aircraft sheet metal maintenance

25. Metal Crimpers crimp, fold, seam, or flatten sheet metal, deforming metal to hold itself or become a needed shape for an application