Nghĩa của từ electrical resistivity bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-điện trở riêng
-điện trở suất
@Chuyên ngành kỹ thuật
-điện trở riêng
-điện trở suất

Đặt câu có từ "electrical resistivity"

Dưới đây là những mẫu câu có chứa từ "electrical resistivity", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ electrical resistivity, hoặc tham khảo ngữ cảnh sử dụng từ electrical resistivity trong bộ từ điển Từ điển Anh - Việt

1. Copernicium – Electrical Resistivity and Electrical Conductivity

2. Fusion-cast refractory with high electrical resistivity

3. Electrical resistivity of Copernicium is — nΩ·m

4. An electrical resistivity of 2 × 10– 4 ohm cm or more.

5. b. An electrical resistivity of 2 × 10-4 ohm cm or more.

6. An electrical resistivity of 2 x 10-4 ohm cm or more.

7. The composition, binding power, electrical resistivity and corrosion resistance of plating were analysed.

8. The resultant polyacetylene was characterized by IR, electrical resistivity measurement and elemental analysis.

9. Electrical resistivity is used widely as a measure of brine saturation in rocks.

10. This paper mainly studies the compression - sensitivity of CFRC and the stability of electrical resistivity.

11. Moreover, the electrical resistivity decreases while the carrier concentration increases with increasing the sulfidation temperature.

12. So this algorithm has great potential applications in the high density electrical resistivity tomography prospecting.

13. Measurements of the electrical resistivity of sintered-silver submicrometre powders by an acoustic method are reported.

14. The electron transport process and current - voltageand the molds to calculate the electrical resistivity were discussed.

15. Archaeological features whose electrical resistivity contrasts with that of surrounding soils can be detected and mapped

16. Electrical resistivity measurements of carbon fiber reinforced cement - based ( CFRC ) are conducted using the four - probe method.

17. The behavior of the electrical resistivity can be explained using the formula for liquid alloys due toFaber andZiman.

18. The effects of annealing on the electrical resistivity, anisotropic magnetoresistivity and hysteresis loop were studied on sputtered permalloy thin films.

19. The Hall coefficient and the electrical resistivity of liquid alloys has been measured with an ac current — ac magnetic field method.

20. High precision instruments of measuring electrical resistivity and magnetoresistivity are needed to study the inner structure and resistance characteristic of nanocrystalline materials.

21. More detailed studies can involve aerial surveys (thermographic photographs taken vertically, oblique photographs in favourable climatic conditions) and electrical (resistivity) or magnetic surveys.

22. The new company sold electrical-measurement mapping services, and recorded the first-ever electrical resistivity well log in Merkwiller-Pechelbronn, France in 1927.

Công ty của họ cung cấp dịch vụ đo vẽ bản đồ bằng điện, và lần đầu tiên đã ghi được địa vật lý giếng khoan bằng phương pháp log điện trở tại Merkwiller-Perchelboronn, Pháp, năm 1927.

23. This paper introduces some magnetic parameters of magnetic material, such as magnetic hysteresis loop-line, electrical resistivity and magnetoresistivity, and the methods to measure them.

24. Electrical resistivity soundings with small, a.c. equipment (“Earth Testers”) are reliable and interpretable to depths varying from approximately 30 metres in conductive soils to about 100 metres in resistant ground.

25. The Hall-coefficient and the electrical resistivity of liquid transition metals and their alloys with mono- and polyvalent simple metals have been measured with a sensitiveac current-ac magnetic field method.

26. Aeromagnetic map (Katsina-Ala sheet 272 S.E.) and the electrical resistivity sounding data obtained along eight traverses, from two sites, across the Katsina-Ala river were examined with the principal aim of defining depths to the bedrock, bedrock relief, geologic structures and the nature of the superficial deposit.

27. The composition for forming conductive electrodes according to the present invention has superior adhesion strength of the bond between the coating and a substrate, obtains excellent electrical resistivity characteristics in a low-temperature region of 300°C or lower, exhibits remarkably superior weldability to a solder ribbon when applied to solar cells, has excellent printing characteristics to achieve an electrode pattern with a high resolution, and has excellent rheological properties to obtain a high aspect ratio.