Nghĩa của từ elastic-plastic theory bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-lý thuyết đàn hồi dẻo
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-lý thuyết đàn hồi dẻo
Đặt câu có từ "elastic-plastic theory"
1. Considering the tangential force applied on a contact spot, the critical area demarcating the elastic and plastic regimes is obtained by comparing the normal elastic load with the normal plastic load.
2. The elastic modulus and the plastic properties are affected by the dissolution process.
3. Karman “elementary” rolling theory for rigid-ideally plastic material together with Sommerfeld's lubrication theory.
4. The behaviour of elastic or plastic waves at the joints of trusses is investigated.
5. According to Hertz contact theory, this paper discussed the elastic deformation in the ball screw systems and elastic potential energy caused by it.
6. The resulting theory describes an elastic material which adapts its structure to applied loading.
7. The behaviour of polycrystalline materials including kinematic hardening is modelled by means of elastic-plastic trusses.
8. The concept of substitutive concentrated elastic-plastic rotations, replacing actual elasticplastic zones is used, together with an iterative method of determination of the bending moment distribution to simplify the evaluation of elastic-plastic deflections of hyperstatic beams and frames.
9. Analysis is done within second order theory of small deflections for an ideally elastic material.
10. Based on this theory, elastic sliding key gearshift mechanism of machine tools can be designed.
11. An elastic-viscoplastic theory for reck masses is proposed by, introducing the deformation features on discontinuities.
12. 30 The effect of elastic modulus of adhesive on the str ess distribution in aluminium alloy single lap joint was investigated using elastic-plastic finite element method(FEM).
13. The analyses use a bilinear elastic–perfectly plastic material response based upon the associated flow rule of plasticity.
14. The behaviour of polycrystalline materials including kinematic hardening was modelled in [1] by means of elastic-plastic trusses.
15. The plate-strip reaches the elastic and then the elasto-plastic state as the angle of bending increases.
16. The plate-strip first reaches the elastic and then the elasto-plastic state as the angle of bending increases.
17. In the 1930s, his research was supplemented with works on the theory of plastic deformation.
18. The effective flexural stiffness is determined from the slope of the elastic portion of an equivalent elastic-plastic load–deflection curve that has the same area under the curve as the actual nonlinear relationship.
19. Resonance of a finite elastic-plastic bar excited by longitudinal stress impulses of amplitudes smaller than the yield stress is studied.
20. The elastic Adjuster made of environmentally friendly plastic, durable, and not easy to break, can be used for a long time
21. Waist cinchers and waspies from the 1980s are a type of wide, laced belts with elastic fabric and soft plastic stiffeners.
Áo nịt bụng và Latex từ những năm 1980 là một loại thắt lưng to, có dây thắt làm bằng vải co dãn và nhựa dẻo.
22. Additionally, the grains of sand are bonded together with the elastic or flexible urethane acrylate resin, likewise reducing plastic deformation and cracking.
23. The influence of sulfur level on the properties of trans 4 polyisoprene(TPI) after the transition from plastic polymer to elastic polymer was investigated.
24. There are three distinct phases in Coining: a) Phase I= initial indentation (plastic-elastic action) b) Phase II = gross upsetting and neutralization of clearance c
25. Adhesive elastic bandage×××