Nghĩa của từ distribution of stress bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-sự phân bố ứng suất

Đặt câu có từ "distribution of stress"

1. The distribution model of bond stress over the splice length is developed.

2. In specific cases exact solutions of the stress distribution resulting from a given distribution of surface traction can be found.

3. Formulae are given for the stress distribution of the section depending on the number of cycles.

4. Consideration of the stress field distribution at the crack tip leads to the application of fracture mechanics.

5. Results: The deviation and stress distribution of the edentulous jaws and the base plates were obtained.

6. The simulation results show that this method can reduce maximal axial stress by more than 5%, and it observably improves stress distribution.

7. The calculations shall use suitable analysis techniques to establish stress distribution throughout the container.

8. Online accurately measured the surface electric - field distribution of SiC stress - grading coating always is a difficulty.

9. Good weight distribution minimizes the additional stress that cargo places on a vessel’s structure.

10. The reason for this effect of Anisotropic elasticity is that the stress distribution is different compared to an …

11. Finally, through an example, the paper get a maximum stress point and stress distribution on a belt tooth and compare them with the solution of fixable plane problem.

12. For such problems, a relatively finer grid is used in the areas of high stress gradients and a rather Coarser grid where the stress distribution is relatively uniform

13. This method allows transient temperature and thermal stress distribution to be determined from interior temperature histories.

14. The problem of stress distribution in rotating aeolotropic laminated heterogeneous disc under action of a time-dependent loading is studied.

15. Such pre-excitation pacing therapy may be beneficial to hypertensive patients with an abnormal distribution of ventricular wall stress/strain.

16. In the design method the beam flexural stiffness is designed to give an adequate distribution of the interface stress so that the maximum stress in the wall does not exceed allowable limits.

17. In the design method the beam flexural stiffness is calculated to give an adequate distribution of the interface stress so that the maximum stress in the wall does not exceed allowable limits.

18. The stress distribution of the thick plate containing a thin adhesive layer is investigated under arbitrarily distributed loads applied along the edges.

19. The stress distribution of the reserved root with different prosthodontic design after hemisection therapy under the vertical loading and obliquely loading was observed.

20. Binomial distribution synonyms, Binomial distribution pronunciation, Binomial distribution translation, English dictionary definition of Binomial distribution

21. 12 The stress distribution of the reserved root with different prosthodontic design after hemisection therapy under the vertical loading and obliquely loading was observed.

22. Objective: To study how the depth and morphology of affected the dentinal stress distribution of the root of maxillary central incisor using three-dimensional-finite-element analysis.

23. The computed results show that the presence of an interphase can have an important influence on the effective property and local stress distribution of the composites.

24. Along with axial stress and radial stress, Circumferential stress is a component of the stress tensor in cylindrical coordinates.

25. Distribution Arresters MPS offers a variety of Distribution Arrester products