Nghĩa của từ deformation due to shear bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-biến dạng do lực cắt
Đặt câu có từ "deformation due to shear"
1. The orefield structure resulted mainly from simple shear progressive deformation, and tectonic deformation was in synchronism with mineralization.
2. To Characterize the shear softening deformation of the grain contact: (5) τ = u s k si 1 + u s k si / τ S τ < c + σ n tanφ σ n tanφ when slipping where τ, u s, τ S, k si, c, and φ denote the shear stress, shear displacement, parameter controlling nonlinear shear deformation, initial shear stiffness, cohesion, and friction angle of the
3. A young, probably Tertiary, deformation caused four systems of fault planes with parallel shear planes.
4. They were investigated over a wide range of shear rates, frequencies, deformation amplitudes, and temperatures.
5. The links broke down successively at increasing shear deformation and formed domain-like groups of particles.
6. The nonlinear equations describing in-plane deformation of a rotating elastic rod, taking into account shear effect, are derived.
7. Conversely, La Niña causes an increase in activity due to a decrease in wind shear.
Ngược lại, La Niña gây ra sự gia tăng hoạt động do sự giảm tốc độ gió.
8. The combined deformation due to torsion and tension of incompressible rigid viscoplastic circular shafts is analyzed.
9. In addition, deterioration in product quality due to thermal deformation or thermal impact may be prevented.
10. An experimental study of the behaviour of an alluvial sand under different strain increment paths representing shear–volume coupled deformation is presented.
11. An engineering method is presented for the analysis of creep deformation in wood due to changing moisture content.
12. Latest Devonian to Early Carboniferous igneous rocks along the Cobequid shear zone of central Nova Scotia record a complex history of intrusion, volcanism, deformation, and hydrothermal alteration.
13. All important effects like blade twist, shear deformation and rotary inertia for bending, effect of centrifugal force and stagger angle are taken into account.
14. The Autochthonous blocks were formed due to the deformation and displacement of the unconsolidated sediments caused by gravitational and …
15. As a result, joints that traverse impermeable deformation band shear zones may provide the primary pathways for fluid flow in sandstones Compartmentalized by these zones.
16. It is found that the critical buckling load, per unit of length normal to the plane of deformation, isGH, the infinitesimal shear modulusG times the widthH of the column.
17. It is shown here that the percentage of shear deflection can be considerable, approaching the amount due to pure bending.
18. Compressive strain in an elastic material is defined as the deformation in a solid due to the application of Compressive stress
19. Burnishing may refer to: Burnishing (metal), plastic deformation of a surface due to sliding contact with another object Burnishing (pottery), pottery polishing treatment
20. Shear algorithm
Thuật toán kéo cắt
21. Catastrophic damages to the ground structures can be caused by large ground deformation due to seismic liquefaction. Therefore liquefiable ground in earthquake must be improved.
22. Shear layer
23. Shear factor
24. The dependence of the absolute value of the complex viscosity on the deformation rate amplitude, in the range of large amplitudes, is symbatic to the dependence of the apparent viscosity on the shear rate.
25. Chapter 2. Design of Beams – Flexure and Shear 2.1 Section force-deformation response & Plastic Moment (Mp) • A beam is a structural member that is subjected primarily to transverse loads and negligible axial loads