Nghĩa của từ deep-hole drill bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-khoan lỗ sâu

Đặt câu có từ "deep-hole drill"

Dưới đây là những mẫu câu có chứa từ "deep-hole drill", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ deep-hole drill, hoặc tham khảo ngữ cảnh sử dụng từ deep-hole drill trong bộ từ điển Từ điển Anh - Việt

1. Drill a hole in each corner.

2. We will drill a hole through this swarm!

3. I need a drill to make a hole.

4. Because what you need is the hole, not the drill.

Bởi vì cái mà cần là cái lỗ, không phải cái khoan.

5. An Arbored hole saw has a pilot hole drill bit in the center, and a non-Arbored hole saw doesn't

6. Drill a hole and insert a wall anchor if needed.

7. A-XINTONG Vertical Self Centering Dowel Jig Kit,Dowel Drill Guide,2.75" Aluminum Alloy 3-Hole Drill Bit Guide Jig Positioner Locator,6/8/10mm Pin Fixture Wood Hole Drill Bit Set Woodworking Tools

8. He used a drill to bore a hole in the door.

9. Can a hammer make the fine hole that a drill does?

10. Drill a hole in the thwart (seat) and put the Belaying pin …

11. Large drilling rigs can drill Boreholes over 200 metres deep

12. SD-3 Flat Bottom Counterbores are used to drill the pilot hole or clearance hole and Counterbore a flat bottomed hole in one step

13. SD-3 Flat Bottom Counterbores are used to drill the pilot hole or clearance hole and counterbore a flat bottomed hole in one step

14. He dug a deep hole in the garden.

15. Brace: see drill drill, tool used to create a hole, usually in some hard substance, by its rotary or hammering action

16. We're going to put you out, just so we can drill the hole.

Chúng tôi sẽ cho anh hôn mê, để sau đó có thể tiến hành khoan vào hộp sọ.

17. A common drill rig used for "Shot Hole Drilling" is the ARDCO C-1000 drill mounted on an ARDCO K 4X4 buggy.

Một giàn khoan phổ biến được sử dụng cho "khoan nổ địa chấn" là giàn khoan ARDCO C-1000 được đặt trên xe chở RDCO K 4X4.

18. Drill the perfect hole every time with MSC's selection of Counterbores and porting tools

19. However by reusing the same hole, there was still added pressure on the drill.

20. The motor that drives the drill is located “down hole,” not at the surface.

21. Get the special drill bit to bore the correct-size hole for the job.

22. Cannulated Drill Bits are individually sterile packaged and intended used for preparing a pilot hole and the gliding hole for Cannulated screw insertion

23. The oil is not liquid. You can't just drill a hole and pump it out.

Dầu ở đây không phải ở dạng lỏng; bạn không thể cứ khoan một cái lỗ rồi bơm nó lên.

24. As verbs the difference between drill and Bore is that drill is to create (a hole) by removing material with a (tool) while Bore is (senseid)to make a hole through something or Bore can be (bear)

25. In Product Knowledge / Cannulated drill (also known as coring drills, steel plate drills, hole drills), the standard name for the multi-edged steel plate drill