Nghĩa của từ datum bằng Tiếng Việt

@datum /'deitəm/
* danh từ, số nhiều data
- số lượng đã cho (bài toán...); điều đã cho biết
- luận cứ
- (số nhiều datums) mốc tính toán, mốc đo lường
@Chuyên ngành kỹ thuật
-dấu quy chiếu
-điểm chuẩn
-điểm cố định
-điểm quy chiếu
-dữ kiện
-dữ liệu
-mặt chuẩn
-mốc
-mốc đo lường
-mức chuẩn
-mục dữ liệu
-số liệu
@Lĩnh vực: toán & tin
-datum
@Lĩnh vực: điện tử & viễn thông
-gốc quy chiếu

Đặt câu có từ "datum"

1. Length of the datum

2. Amaremus Datum registracije: 09.09.2010

3. 'Datum' is the singular of 'data'.

4. Select planar surface or datum plane.

5. Definition of the datum points (see figure

6. And you'll build the firewalls to protect your datum?

7. An united space datum line has been given.

8. Potential is defined relative to an arbitrary datum.

9. Every theory, datum, or fact is generated by purpose.

10. Establishing datum plane is the base assessing surface parameter.

11. Go to datum point 69173 and tell Azrian you're there.

12. Then with A position datum and the surface processing.

13. THE ORIGINAL WORDING ABOUT THE CONCEPT OF SIZE DATUM.

14. horizontal datum point forward of V# and #° to the left (Pr

15. DataModel is the description of the selections and summary of datum.

16. Methods 36 clinical datum of immunity depression concurrence tuberculosis were analysised.

17. lower vertical datum point forward of V# and #° below the horizontal (Pr

18. The part of the world the piece of datum refers to.

19. Top illustration - Bottom surface is specified as Datum A and the surface at the 20 degrees basic (TED) angle has an Angularity tolerance of .13 relative to datum A.

20. Nunc tempus Acceptabile fulget datum divinitus, ut sanet orbem languidum medela parsimoniae

21. Geographic scope in which the local depth datum is practically used.

22. Determination of the datum points (example of a left-hand steering control vehicle

23. This paper dwells the concepts of retrogressive aggradation and the datum of erosion.

24. Requests to make an objection shall specify the datum or data concerned

25. Water level determining the origin of depth measurements for the chart datum.

26. The arrangement has a datum and the aerofoil has a radial span.

27. Non quia quæro datum, sed requiro fructum Abundantem in ratione vestra

28. Concentricity: Concentricity is a median point centered to a datum axis control

29. The sixth datum of each holding gives the number of indivisible 10-data groups.

30. We can solve these problems by using method of floating datum DMO superposition.

31. Google Earth uses Simple Cylindrical projection with a WGS84 datum for its imagery base.

32. A lower vertical datum point forward of V2 and 5° below the horizontal;

33. lower vertical datum point forward of V2 and 5° below the horizontal (Pr2);

34. The horizontal plane through the upper edge of the guiding device is the reference datum.

35. Concentricity does not control shape but Position of the shape to a fixed datum

36. Phl 4:17 - non quia quaero datum sed requiro fructum Abundantem in rationem vestram

37. Concentricity sets a limit on how non-symmetrical the shaft is relative to the datum axis

38. Concentricity is complex and rare as it controls opposed median points to a datum axis

39. (i) The positioning system and the SENC shall be based on the same geodetic datum.

40. An analog computer represents a datum as a voltage, distance, position, or other physical quantity.

Một máy tính tương tự (analog computer) biểu diễn dữ liệu bằng hiệu điện thế, khoảng cách, vị trí hoặc các định lượng vật lý khác.

41. The Concentricity control specifies that there is a 0.1 dia tolerance cylinder centered on datum [A]

42. How likely is this datum to be confused with other data if the representation is corrupted?

43. Note that criteria, data and dicta are plural words: the singulars are criterion, datum and dictum.

44. Concentricity, sometimes called coaxially, is a tolerance that controls the central axis of the referenced feature, to a datum axis. The axes for the datum and referenced feature are derived from the median points of the part or feature.

45. The data shall be communicated in computer readable form, as decimal degrees in the WGS-84 datum.

46. 34) This clear datum of the tradition helps us to appreciate the inseparability of Christ and the Church.

47. What that means is that Circularity tolerance does not refer to or depends on any datum

48. Lowest astronomical tide (LAT) and Chart Datum (CD) – The lowest tide which can be predicted to occur.

Thủy triều thiên văn thấp nhất (LAT, Lowest astronomical tide) và Chuẩn hải đồ (CD, Chart Datum) – Thủy triều thấp nhất có thể dự đoán là xảy ra.

49. The vertical datum is a surface to which elevations and/or depths (soundings and tide heights) are referred.

50. Height scanning interferometer for determining the absolute position and surface profile of an object with respect to a datum