Nghĩa của từ core diameter tolerance bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: điện tử & viễn thông
-dung hạn đường kính của lõi
-dung hạn đường kính của nhâ

Đặt câu có từ "core diameter tolerance"

Dưới đây là những mẫu câu có chứa từ "core diameter tolerance", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ core diameter tolerance, hoặc tham khảo ngữ cảnh sử dụng từ core diameter tolerance trong bộ từ điển Từ điển Anh - Việt

1. When diameter tolerance is specified on top of Circularity tolerance, then the Circularity tolerance is always less than the diameter tolerance.

2. By adjusting the fiber parameters, the subwavelength-diameter solid core or hollow core optical fibers have large evanescent field.

3. The universal measurements for Bearings are 8mm (core), 22mm (outer diameter), and 7mm (width).

4. An optical fiber evanescent wave methane gas sensor based on core diameter mismatch is reported.

5. Angularity applied on non feature of size creates tolerance zone consists of two parallel planes and all the surface elements must lies within tolerance zone. When Angularity is applied on cylindrical feature of size, tolerance zone is a cylinder, diameter of tolerance value referenced in feature control frame

6. Circularity tolerance is a form tolerance

7. 5 We all need tolerance, oodles of tolerance.

8. Free Standing Portable Barres Free Standing Portable Ballet Barre with Adjustable Barre on One Side, 1 7/8”, +/- 1/8” Diameter, +/- 1/8” Length Tolerance specifications

9. * Drug tolerance

* Dung nạp thuốc lờn thuốc

10. Increment Borers & Hammers Choice of increment borer model, length, core diameter and threading depends on size of tree and type of wood

11. Extremism became tolerance.

Sự cực đoan trở thành sự khoan dung.

12. Core synonyms, Core pronunciation, Core translation, English dictionary definition of Core

13. From Violence to Tolerance

Từ sự hung bạo sang sự khoan dung

14. The equatorial diameter exceeds the polar diameter by 26 miles.

15. The component of core competence includes core technique , core management and core marketing.

16. In the present invention, a diameter tolerance of a metal pipe to be inserted through a clamp is absorbed in order to prevent vibrations of the metal pipe and abnormal noises.

17. However, surface variations of the controlled diameter can have a direct impact on the end result because a Concentricity tolerance invokes a requirement which is much different than what most people realize.

18. Biomechanics of Screw Fixation • Cannulated Screws – Increased inner diameter required – Relatively smaller thread width results in lower pull out strength – Screw strength minimally affected (αr4 outer core -r 4 inner core ) Figure from: Tencer et al, Biomechanics in OrthopaedicTrauma, Lippincott, 1994.

19. You can install PP filter core, carbon filter core, softener filter core, UF filter core, etc.

20. I have low alcohol tolerance.

21. The tolerance to the impact velocity is ± 2 % and the tolerance to the impact direction is ± 2°.

22. The indicators are about the ‘Abiotical’ factors such as climate, soil, salt tolerance and heavy metal tolerance

23. Resource allocation guided by risk tolerance.

24. Tolerance is one of his strengths.

25. We have zero-tolerance to terrorism.