Nghĩa của từ centre line (of rivet holes) bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-đường tim lỗ đinh tá
Đặt câu có từ "centre line of rivet holes"
1. Aligning punch definition, a drift for Aligning rivet holes
2. The fuselage cracked along the rivet line.
3. Prepare sheet metal holes for flush rivet installation with precision with cutters for Countersinking
4. The centre line of the impactor must be aligned with the centre line of the rib's piston.
5. The centre line of the impactor should be aligned with the centre line of the rib's guide system.
6. The centre line of the impactor should be aligned with the centre line of the rib's guide system
7. The Cufflink holes should line up perfectly
8. The Child Restraint System centre line shall be aligned exactly with the centre line of the test bench.
9. To install a Closed end rivet, the entire fastener is inserted through drilled holes in the parts being joined, and a special tool is used to draw the mandrel into the rivet.
10. Choose from our selection of rivet Clinchers, including tools, rivet setters, and more
11. Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 43 metric series.
12. Air powered hammer riveters and rivet busters and rivet cutters therefor
13. Air powered hammered riveters and rivet busters and rivet cutters therefor
14. 27 Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 43 metric series.
15. 7 Draw a line through the centre of the circle.
16. Their main line of support is through the day centre manager.
17. Rivet supply machines
18. We also do line Coring to create square holes for HVAC Ducting
19. The profile of an aerofoil blade is measured through centre line determination.
20. In cooling, the rivet contracts.
21. Dig holes with speed and plumb-line accuracy using a Bobcat® Auger attachment
22. Yellow-Bellied sapsucker will return to the same tree repeatedly and the new holes are for the most part in line with old holes
23. Anvil design for rivet setting machine
24. P= pelvis reference point (at the rear on the centre line of the manikin)
25. Burbot through the ice are augering 20-30 or more holes before wetting a line