Nghĩa của từ capacity of driven pile bằng Tiếng Việt
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-khả năng chịu lực của cọc đóng
Đặt câu có từ "capacity of driven pile"
1. 25 It's introduced some situation about H type steel pile driven into batholite, ultimate load carrying capacity and deviation of pile top while using long distance follower pile under water.
2. An arrangement for increasing the load carrying capacity of a pile
3. The interrelationship was established between pile capacity and pile dynamic resistance at the same site. It will provide important scientific foundation for the criteria of driving pile construction.
4. The technical result consists in enhancing the horizontal load-bearing capacity of a pile.
5. The test results showed an increase in pile capacity with increased rate of loading.
6. Therefore, it is feasible to analyze the bearing capacity of a large diameter single pile by three parameters load transfer function model of pile body and pile top and numerical iteration method.
7. Method of manufacturing a reinforced oblong concrete product for longitudinal load-bearing purposes, and a driven pile
8. An Aerated Static Pile turns off, how quickly does the oxygen deplete in the core of the pile? yWhat percentage of O2 do we want to maintain in an aerobic system? yActive Composting is primarily a _____ driven process whereas Curing is primarily a _____ driven process.
9. He then can determine, thanks to a precise guide chart, the load bearing capacity of the pile.
10. Solution for A 0.36-m square prestressed concrete pile is to be driven in a Clayey soil
11. The machine eliminates the time problem in the preparation of bored pile equipment with its 36 m capacity.
12. The bearing capacity of the piles is found to depend on the layered structure, load inclination, and pile batter.
13. Key words: pile foundation, model test, layered soil, eccentric load, inclined load, sand, clay, analysis, bearing capacity.
14. Key words : bearing capacity, deformation, batter pile, inclination factor, inclined load, layered soil, model test, sand, clay.
15. Method of converting physical properties of ground in which tapered section pile is installed, and bearing capacity calculating method using same
16. Key words: bearing capacity, clay, displacements, horizontal load, lateral pressure, layered soil, model test, moment, pile, pressuremeter, sand.
17. Key words: bearing capacity, clay, displacements, eccentric load, horizontal load, lateral pressure, layered system, model test, pile, sand.
18. Key words: ocean soil, sand, shear strength, pile, model test, bearing capacity, friction, uplift, active and passive earth pressures.
19. Since the concrete expansion part is formed on the end of the construction pile or tensile member, the allowable bearing capacity of the construction pile or the pulling resistance of the tensile member can be significantly improved.
20. Air-to-water chillers with rated cooling capacity ≥ 400 kW when driven by an electric motor
21. 3 Tradition design about step gear-driven wastes partial carrying capacity of makings. Simple goal parameter optimization is insufficient.
22. Pile fabrics of man-made fibres, knitted or crocheted (excl. ‘long pile’ fabrics)
23. A full-scale pile load-testing program was conducted to evaluate the axial compressive capacity of drilled concrete tapered piles in frictional soil.
24. Air-to-water chillers with rated cooling capacity < 400 kW, when driven by an electric motor
25. Air-to-water chillers with rated cooling capacity ≥ 400 kW, when driven by an internal combustion engine