Nghĩa của từ bottom (of the drill hole) bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-đáy lỗ khoa

Đặt câu có từ "bottom of the drill hole"

Dưới đây là những mẫu câu có chứa từ "bottom of the drill hole", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ bottom of the drill hole, hoặc tham khảo ngữ cảnh sử dụng từ bottom of the drill hole trong bộ từ điển Từ điển Anh - Việt

1. SD-3 Flat Bottom Counterbores are used to drill the pilot hole or clearance hole and Counterbore a flat bottomed hole in one step

2. SD-3 Flat Bottom Counterbores are used to drill the pilot hole or clearance hole and counterbore a flat bottomed hole in one step

3. Blasting conditions are both severe, the operator should use premium explosives, at least in the bottom one third of the drill hole

4. Drill a hole in each corner.

5. Because what you need is the hole, not the drill.

Bởi vì cái mà cần là cái lỗ, không phải cái khoan.

6. We will drill a hole through this swarm!

7. I need a drill to make a hole.

8. To punch hole in the bottom of Cradleboard, fold bottom flap inward then punch.

9. An Arbored hole saw has a pilot hole drill bit in the center, and a non-Arbored hole saw doesn't

10. There ain't no hole in the bottom of her chin.

Không có cái lỗ quái nào ở dưới cằm của cô ta cả.

11. He used a drill to bore a hole in the door.

12. Can a hammer make the fine hole that a drill does?

13. Drill the perfect hole every time with MSC's selection of Counterbores and porting tools

14. Drill a hole in the thwart (seat) and put the Belaying pin …

15. Flat Bottom Counterbores with Slow Spiral, HSS M2 Fully Ground Drill Bits; Flat Bottom Counterbores with Slow Spiral, HSS M2 Fully Ground Drill Bits

16. Drill a hole and insert a wall anchor if needed.

17. A-XINTONG Vertical Self Centering Dowel Jig Kit,Dowel Drill Guide,2.75" Aluminum Alloy 3-Hole Drill Bit Guide Jig Positioner Locator,6/8/10mm Pin Fixture Wood Hole Drill Bit Set Woodworking Tools

18. The water drained out of the flowerpot through the hole in the bottom.

19. The motor that drives the drill is located “down hole,” not at the surface.

20. Get the special drill bit to bore the correct-size hole for the job.

21. We're going to put you out, just so we can drill the hole.

Chúng tôi sẽ cho anh hôn mê, để sau đó có thể tiến hành khoan vào hộp sọ.

22. However by reusing the same hole, there was still added pressure on the drill.

23. Inthe author synthetically analysed the present situation and development tread of - hole drill home and abroad.

24. A common drill rig used for "Shot Hole Drilling" is the ARDCO C-1000 drill mounted on an ARDCO K 4X4 buggy.

Một giàn khoan phổ biến được sử dụng cho "khoan nổ địa chấn" là giàn khoan ARDCO C-1000 được đặt trên xe chở RDCO K 4X4.

25. Brace: see drill drill, tool used to create a hole, usually in some hard substance, by its rotary or hammering action