Nghĩa của từ ball hardness test bằng Tiếng Việt
@Chuyên ngành kỹ thuật
-sự thí nghiệm độ cứng brinell
@Lĩnh vực: hóa học & vật liệu
-phép thử độ cứng Brinell
Đặt câu có từ "ball hardness test"
1. Their fracture toughness and hardness were determined with Vicker's indentation test machine.
2. In addition to the adhesive test, bending strength, hardness, and colour of the modified timbers were examined.
3. Fire hazard testing -- Part 10-2: Abnormal heat - Ball pressure test
4. Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test
5. Fire hazard testing — Part 10-2: Abnormal heat — Ball pressure test
6. 25 A series of analysis were made on the cracked area, including macro-and micro-analysis, chemical, hardness, microstructure test and hydrogen brittleness removing test.
7. Fire hazard testing — Part 10-2: Abnormal heat — Ball pressure test method
8. Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
9. Water hardness adjustors
10. Apatite has a consistent hardness and serves as the index mineral for a hardness of 5 in the Mohs Hardness Scale.
11. Almandine has a hardness of 7 - 7.5 on the Moh’s Scale of Hardness
12. Rubies have a hardness of 9.0 on the Mohs scale of mineral hardness.
Hồng ngọc có độ cứng là 9,0 theo thang độ cứng Mohs.
13. Metal hardness testing machines
14. The Brinell scale Characterizes the indentation hardness of materials through the scale of penetration of an indenter, loaded on a material test-piece
15. In terms of hardness, Chrysoberyl …
16. Apx-hardness and Apx-completeness
17. In this paper the shortcoming of existing test system of stab sensitivity by drop ball was analysed.
18. Wolfe said girls are steady and thorough while "boys play this test like a pin-ball machine."
19. The hardness, surface morphology and adhesion were analyzed and examined respectively by micro - sclerometer , scanning electron microscope and lever style omnipotence intension test machine.
20. Accessories include: shaft mounts, centre post adaptor, test ball, 3-jaw chuck, calibration set and calibration standard.
21. Hardness and Strength of Amphibolite
22. Elastic and thermoeleastic constants, abrasive hardness and indentation hardness were measured on AgClO3, NaClO3 and NaBrO3.
23. Birefraction: none Hardness: 5.5 - 6.5 Spec
24. Birefraction: 0.04 Hardness: 5 - 6 Spec
25. Instrumented indentation test is a new kind of testing method. It can determine not only the hardness but also the materials parameters of metallic materials.