Nghĩa của từ arc current bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: điện lạnh
-dòng hồ quang

Đặt câu có từ "arc current"

Dưới đây là những mẫu câu có chứa từ "arc current", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ arc current, hoặc tham khảo ngữ cảnh sử dụng từ arc current trong bộ từ điển Từ điển Anh - Việt

1. Arcing, which transfers the arc, or the heated, glowing electrical current, to the arc runners (contacts) in the arc chute (contact connectors)

2. DC arc resistance and DC Arcing current calculations—iterative solution Figure 2 illustrates the circuit that is used as an example for calculating the DC arc resistance and the DC Arcing current.

3. Traditional AC current is not too stable and the arc tends to go out.

4. Welding current generators, converters, transformers and control devices for electric arc welding and parts thereof

5. During an Arcing fault, the arc has resistance, which causes the Arcing short-circuit current to be smaller than the bolted short-circuit current

6. 1 Story Arcs 1.1 Introduction Arc 1.2 Jailbreak Arc 1.3 Promised Forest Arc 1.4 Search For Minerva Arc 1.5 Goldy Pond Battle Arc 1.6 Cuvitidala Arc 1.7

7. FIND THE ARC LENGTH OF THE Bolded ARC

8. Electrical Arcing, arc faults and arc flashes are extremely dangerous because it is a concentration of the arc fault current and voltage in one place, resulting in the release of enormous energy that could potentially cause injury through severe burns and fire.

9. Gas arc welding machine and arc cutting machine

10. Arc welding equipment — Part 3: Arc striking and stabilizing devices

11. So the word arc length, that orange shape is an arc.

12. Alternatively available with current transformers with secondary currents of either 1 A or 5 A, the arc fault current is detected by measurement transducers positioned upstream of each feeder circuit-breaker.

13. Arc to transport

14. Where's the arc?

Hình cung đâu?

15. IEEE 1584—IEEE Guide for Performing Arc-Flash Hazard Calculations provides two sets of equations for calculating the Arcing short-circuit current.

16. Electric arc welders

17. 100 Degrees to Centesimal Seconds Of Arc = 1111111.1111: 5 Degrees to Centesimal Seconds Of Arc = 55555.5556: 200 Degrees to Centesimal Seconds Of Arc = 2222222.2222: 6 Degrees to Centesimal Seconds Of Arc = 66666.6667: 300 Degrees to Centesimal Seconds Of Arc = 3333333.3333: 7 Degrees to Centesimal Seconds Of Arc = 77777.7778

18. Intersect with this arc

19. (a)submerged arc welding;

20. Show a Conic Arc

21. Transformation Scroll (Arc Angeling)

22. Electric arc cutting apparatus

23. 10 Stage 3 , early Pleistocene, anticlockwise rotation of Luzon arc and continent - arc collision.

24. Remove a Conic Arc

25. Hide a Conic Arc