Nghĩa của từ angle of wall friction bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: cơ khí & công trình
-góc ma sát ngoài
-góc ma sát vách

Đặt câu có từ "angle of wall friction"

1. The effects of soil friction angle, wall inclination, wall friction angle, amplification of vibration, and horizontal and vertical earthquake acceleration on the active earth pressure have been explored in this study.

2. Key words : probability, sheet-pile wall, active and passive pressure, friction angle, safety factor, safety margin, reliability index.

3. Furthermore, the friction surface rests against the inner wall of the guide tube.

4. Angle brackets and wall and door protectors of metal

5. The influence of friction at the bottom and the bottom inclination angle are extensively discussed.

6. The code reproduces shear band inclinations which depend on both the angle of friction and the angle of dilation. Localization occurs at the yield point.

7. To overcome Bridging the wall friction must be reduced or prevented from occurring.

8. The total friction angle (arctanτ/σn) at which sliding occurs provides an estimate of the joint roughness coefficientJRC.

9. The intersection angle of the mesial edge of the side wall and the bottom wall of the arch wire slot is an acute angle and the intersection angle of the distal edge of the side wall and the bottom wall of the arch wire slot is an acute angle, which will be an aid for the arch wire to move along the arch wire slot after being ligatured.

10. With the increase ofm, Falkner-Skan parameter, the magnitude of skin friction and wall heat transfer increases.

11. The mass of the actuator is 1.6 g and an angle of > 10° is needed to overcome friction.

12. Unless splash occurs, the equilibrium contact angle greatly affects the surface roughness on the wetting dynamics, which in turn alter friction forces at the wall and, therefore, the energy dispersed during spread.

13. The spring force alters the closing force of the friction clutch (13) in such a way that the torque of the friction clutch (13) is reduced as the steering angle increases.

14. The wall was leaning at an angle of ten degrees to the perpendicular.

15. A steering angle limiting value is derived from the reference speed and from the friction correction value and compared with the actual steering angle.

16. Key words: statistics, probability, ultimate bearing capacity, allowable bearing capacity, shallow foundations, friction angle, numerical methods.

17. The wall looks like a very steep slope at an angle of + - 80 °.

18. The influences of the parameters such as elastic modulus of rock, cohesive strength and friction angle of slide surface, thickness and angle of rock layer on the critical length were studied.

19. These include wall slip, liquid velocity, surface tension and the contact angle of liquids.

20. We still make characters on the wall directly and deform the big characters through the angle of bend making by wall.

21. Results revealed that punch shape, compression speed and die-wall friction significantly affect thermomechanical behaviour of powders during die compaction.

22. A film model is described for free convective heat transfer and friction in the presence of wall suction or injection.

23. The effects of micro-hole valve of homogenizer on bacteria's surface structure showed cell wall friction damage and cell membrane breakage.

24. Let's sing! An acute Angle is a little so small, Right Angle in the corner of a wall, Obtuse Angle at 2:50 in day-time, Straight Angle in a straw in soda-lime!

25. The friction angle is determined from stresses which are calculated from external loads and the nominal contact area.