Nghĩa của từ alnico bằng Tiếng Việt

@alnico
- (Tech) hợp kim alnico
@Chuyên ngành kỹ thuật
-nhôm
@Lĩnh vực: điện lạnh
-annico
@Lĩnh vực: điện
-hợp kim alnico
@Lĩnh vực: toán & tin
-hợp kim Alnio (sắt, nhôm, kền, bạch kim)

Đặt câu có từ "alnico"

Dưới đây là những mẫu câu có chứa từ "alnico", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ alnico, hoặc tham khảo ngữ cảnh sử dụng từ alnico trong bộ từ điển Từ điển Anh - Việt

1. Method of alnico alloy melting

2. Earlier pickups (around 1952) had Alnico 3 magnets, but in 1957 Gibson switched to Alnico 5.

3. Process for manufacturing alnico system permanent magnet

4. Other types, such as alnico 5 and alnico 8, are anisotropic, with each having a preferred direction of magnetization, or orientation.

5. The magnetomotive generator device is composed of a first alnico, a pole plate, and a second alnico stacked form top to bottom.

6. The materials we use are hard ferrite, AlNiCo and NdFeB.

7. The Eminence Eric Johnson signature 12" alnico guitar speaker was introduced in 2012.

8. Cylindrical Magnets (ALNICO 50 x 10 mm) 1.0 out of 5 stars 1

9. Some brands of alnico are isotropic and can be efficiently magnetized in any direction.

10. THE GROUP OF ALNICO ALLOYS ( CONTAINING IRON , ALUMINIUM , NICKEL AND COBALT ) IS OF PARTICULAR IMPORTANCE .

11. The rest is largely ferrites and the aluminium nickel cobalt (AlNiCo) family of iron alloys.

12. The D130 featured a four-inch flat ribbon wire voice coil and Alnico V magnet.

13. A geophone utilizing an Alnico-9 magnet and having an improved sensitivity over Alnico-9 gcophones of prior art through the lengthening of the parasitic air gap between the upper and lower pole pieces which, results in less magnetic flux leakage.

14. Height proportion of alnico and magnetic pole in magnetic circuit is optimized with optimizing function of ANSYS s...

15. - SUBSTITUTION OF THE COBALT OR REDUCTION OF THE COBALT CONTENT IN ALNICO ALLOYS WHILE RETAINING COMPARABLE MAGNETIC PROPERTIES .

16. And the Alnico pickup sounds huge, almost like a Stratocaster neck pickup on steroids and three steaks a day.

17. The phenomenon should be considered in the fluorescence X-ray analysis of alloys such as silicon in silmine, aluminium in alnico and others.

18. The generally annular magnet, in exemplary embodiments, comprises at least one of a ceramic magnet, ferrite, or an alnico magnet.

19. Anisotropic alnico magnets are oriented by heating above a critical temperature and cooling in the presence of a magnetic field.

20. Alnico magnets produce magnetic field strength at their poles as high as 1500 gausses (0.15 teslas), or about 3000 times the strength of Earth's magnetic field.

21. It has conventional Alnico humbuckers instead of the M-series pickups used in the Nighthawk, and it is cosmetically even more plain than the Nighthawk Special.

22. Using the classic 5E7 circuit, the Bandmaster boasts 26 watts of all-tube tone through 3 x 10" Alnico-magnet Jensen speakers

23. AlNiCo: Magnetic alloy composed of Aluminum, Nickel, Cobalt, Iron and other additives - produced by casting or sintering - can only be processed by grinding and cutting.

24. The magnets (16) are samarium cobalt (SmCo) or alnico permanent magnets having a Curie point exceeding the operating temperature of the mold (400-500 °C).

25. AS A FIRST STEP , PRIORITY WILL BE GIVEN TO SEEKING SUBSTITUTES FOR COBALT OR MATERIALS HAVING MAGNETIC PROPERTIES CLOSE TO THOSE OF THE ALNICO ALLOYS .

26. The material AlNiCo 700 shows a very distinct anisotropy, in contrast to types where an anisotropy is produced only by applying a magnetic field during heat treatment.

27. Its aggressive Floyd Rose will satisfy every solo on the 22 frets neck, and the Alnico Classic (neck) and Classic Plus (bridge) will offer a rich Crunch.

28. An alloy of Alnico system is subjected to a rapid solidification with a spinning solidifier wheel speed of 6 - 40 m/sec, thereby manufacturing a micro-crystalline rapidly solidified powder.

29. A process for manufacturing an Alnico system permanent magnet is disclosed in which the alloy powder of the Alnico system having the proper composition is manufactured through a rapid solidification process, so that the crushability and the formability should be superior, the sintered density should be high, and the magnetic properties should be excellent, as well as cheap in its manufacturing cost and simple in its manufacturing process.

30. One of the major uses for cobalt is superalloyed with iron, nickel and other metals to make Alnico, an alloy that is unusually strong, durable and corrosion-resistant at elevated temperatures, making it useful for jet engines and gas turbine engines for pipeline compressors.

31. From materials, which the company supplies: magnetic forils - split one, non-split, to printers and so forth, magnetic labels for marking in stocks, bands, ferrites, neodymiums - neodymium magnets, AlNiCo, SmCo, units - flat ones, with a screw thread, with a centre hole, with an outdoor screw thread and so forth.

32. The magnetic chuck has a structure in which an accommodation hole (110a) is formed to pass through a chuck main body (110), a first magnetic element (141) is exposed in the direction of the top surface of the chuck main body (110), and an AlNiCo magnet (120) is exposed in the direction of the bottom surface of the chuck main body (110), so that respective objects (200 and 300) to be attached can be attached to two opposite surfaces of the magnetic chuck (100), with the result that the magnetic chuck (100) can be used in various ways.