Nghĩa của từ allen key bằng Tiếng Việt

@Chuyên ngành kỹ thuật
@Lĩnh vực: ô tô
-chìa khóa lục giác
@Lĩnh vực: điện
-khóa đầu lục giác

Đặt câu có từ "allen key"

Dưới đây là những mẫu câu có chứa từ "allen key", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ allen key, hoặc tham khảo ngữ cảnh sử dụng từ allen key trong bộ từ điển Từ điển Anh - Việt

1. You'll need an Allen key to open it.

2. " With just an Allen key and a Phillips screwdriver,

3. We need power drills, 1 / 4 inch hex, an Allen key.

4. Thread the drawbar into cylinder and tighten with an Allen key.

5. You realize you're talking to a guy who flunked Allen key, right?

6. Use the 4 mm Allen key to unscrew and take out the hexagon set screw.

7. Unscrew and remove the M 8 set screw using the 4 mm Allen key provided.

8. The insert, (3), and fin (1), are secured via grub screws, (10), tightened by Allen key (11).

9. Unscrew and take out the set screw with a 2 mm Allen key (the dS needs a 4 mm key).

10. Access to the service valve you can get by disassembling of plug by putting the allen key in a rubber cable.

11. Allen key truss rod adjustment is located on the familiar, Fenderish headstock with its circular string retainer and elephant ear machineheads.

12. 6 Allen key truss rod adjustment is located on the familiar,[www.Sentencedict.com] Fenderish headstock with its circular string retainer and elephant ear machineheads.

13. the connectors consist of a central piece which is fixed using an Allen key and two swivelling attachments for clamping the wellboard boards.

14. Headset Trimming involves using a long Allen-key tool to adjust the minimum and maximum fuel settings in the engines fuel control unit.

15. You drain the heating agent with the use of the drain plug (allen key) (2) which you access by removing the masking plug.

16. Change knives quickly and easily through the easy-access hatch – a set of locking and adjusting screws and a 4mm Allen key are all you need.

17. A release mechanism (120) actuated by an Allen key wrench has a cam member (121) which engages the springs (90, 91) to release the male locking member (50).

18. When the time comes to deploy the system, a single Allen key is all that is needed to remove the grub screws and bolt the stanchions into place.

19. (1) Coulisse ® Collection Pleated Shade (1) 4-Pin (1) Screwdriver Terminal Block (1) 0.035 Allen key Mounting Brackets (2 - 5 depending on width of shade) Mounting Screws (2 per bracket) Wired communications 1/4 in of the headrail up and behind the brackets’ (6 mm) 2 in (51 mm) Wireless communications 1/4 in (6 mm) 2 in (51 mm) Securing Wedges