Nghĩa của từ air flow rate bằng Tiếng Việt

@Chuyên ngành kỹ thuật
-lưu lượng không khí
@Lĩnh vực: điện lạnh
-tốc độ dòng khí

Đặt câu có từ "air flow rate"

Dưới đây là những mẫu câu có chứa từ "air flow rate", trong bộ từ điển Từ điển Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ air flow rate, hoặc tham khảo ngữ cảnh sử dụng từ air flow rate trong bộ từ điển Từ điển Anh - Việt

1. For air-to-water heat pumps: Rated air flow rate, outdoors

2. For air-to-air heat pumps: air flow rate, outdoor measured

3. Air flow rate data: this article defines Air flow rate or cubic feet per minute (CFM) as the term is used to describe building air conditioners, heating systems, or building air movement rates

4. The dilution ratio is calculated from the dilution air flow rate and the split ratio.

5. Air flow rates, air flow rate/exposure port (nose-only), or animal load/chamber (whole-body).

6. We include examples of manufacturer's Air flow rate or CFM data for HVAC equipment like air conditioners and furnaces.

7. The air flow-rate is then converted to pump flow ( # ) in m # rev at absolute pump inlet temperature and pressure

8. The air flow-rate is then converted to pump flow (V0) in m3/rev at absolute pump inlet temperature and pressure.

9. The air flow-rate is then converted to pump flow (Vo) in m3/rev at absolute pump inlet temperature and pressure.

10. The air flow-rate is then converted to pump flow (V#) in m#/rev at absolute pump inlet temperature and pressure

11. The air flow rate shall then be converted to pump flow (V0) in m3/rev at absolute pump inlet temperature and pressure as follows

12. The air flow rate shall then be converted to pump flow (V0) in m3/rev at absolute pump inlet temperature and pressure as follows:

13. The air flow rate must then be converted to pump flow (V0) in m3/rev at absolute pump inlet temperature and pressure as follows:

14. The air flow rate shall then be converted to pump flow (V#) in m#/rev at absolute pump inlet temperature and pressure as follows

15. The verification is done by measurement of ammonia, odour and/or dust in the inlet and outlet air and of all additional parameters relevant for operation (e.g. air flow rate, pressure drop, temperature, pH level, conductivity).