Nghĩa của từ adsorption capacity bằng Tiếng Việt
@Chuyên ngành kỹ thuật
-khả năng hấp thụ
Đặt câu có từ "adsorption capacity"
1. Drying peat significantly reduced its boron adsorption capacity.
2. Methods of improving the adsorption capacity of biochar (14).
3. Langmuir adsorption capacity was found to be 1.85 mg/g.
4. The theoretical maximum adsorption capacity of the Adsorbent was 9
5. Desiccant will be purchased on the basis of adsorption capacity.
6. Granulated zeolites with high adsorption capacity for adsorption of organic molecules
7. 800 m2/g and therefore a high water vapour adsorption capacity.
8. That enlargement means that the adsorption capacity of the clay is increased.
9. Injection of activated carbon impregnated with additives (e.g. sulphur, bromine) increasing adsorption capacity;
10. Injection of activated carbon impregnated with additives (e.g., sulphur, bromine) increasing adsorption capacity;
11. High performance: SORBSIL® CHAMELEON® is a desiccant with excellent adsorption capacity.
12. Small additions of sodium bisulphate diminish the water adsorption capacity of some extenders.
13. The corresponding Langmuir model indicates a maximum adsorption capacity of 13.50 mg/g.
14. Polymeric adsorbents with enhanced adsorption capacity and kinetics and a process for their manufacture
15. Diluting leachate samples with distilled water had a negative effect on the adsorption capacity.
16. Cellulose-based package material having an increased adsorption capacity and process for the manufacture thereof
17. Consequently, an adsorbent that has a high adsorption capacity for trivalent arsenic can be produced.
18. Adsorption capacity—The amount of CO2 adsorbed onto the material under the relevant adsorption conditions.
19. It is found that the residual soil possesses greater adsorption capacity compared to that of kaolinite.
20. Organic matter had the highest adsorption capacity for all three dyes, followed by clay and sand.
21. The maximum adsorption capacity of sawdust for Pb++ and Ni++ were calculated from the Langmuir isotherms.
22. In vitro investigations have shown that the adsorption capacity of activated charcoal (‘Kohle-Compretten’, ‘Ultracarbon’, E.
23. Application of the Langmuir isotherm to the systems yielded maximum adsorption capacity of 29.08 mg g–1.
24. Therefore, it is advisable to replace this media with new carbon after its adsorption capacity is exhausted.
25. To enhance the sensor adsorption capacity and resistance, researchers utilised various surfactants during the organic coating production.
26. The hydrophobic solution is selected so that it does not decrease the adsorption capacity of the carbon filter.
27. Materials with high adsorption capacity bound substances strongly and desorbed them less, whereas less adsorbing materials acted inversely.
28. The adsorption capacity of the organophilic clay decreased as follows: chlorobenzene > 2-chlorophenol > phenol > aniline.
29. Adsorption followed the Langmuir isotherm, with an adsorption capacity of 36 mg tannin and lignin/g silt loam.
30. The laterite is heated for denaturation and than surface - activated to improve the adsorption capacity of the material.
31. Results indicated that further activation of ACM increased surface area, nanopore volume and improved adsorption capacity for marker molecules.
32. In particular, the micronised wheat envelopes had high adsorption capacity and were suitable for use in existing industrial systems.
33. The device is characterized by a high adsorption capacity, even penetration of the target substance and a simple structure.
34. The heavy metal inside the raw materials created metal hydroxy on the Adsorbent surface that offered elevated adsorption capacity for phosphorus
35. The water adsorption capacity, expressed as equilibrium moisture content (EMC), was measured at a high relative humidity (RH ∼100%, 21 °C).
36. Spindle-like Boehmites with high adsorption capacity for Congo red (CR) from water were prepared via a hydrothermal synthesis method without any surfactants
37. The results show that adsorption capacity of activated carbon was decreased with an increase in Adsorbent concentration and by the presence of surfactant and humic acid.
38. The activated carbon used for the absorptive separation of the carbonyls can be regenerated as often as desired, while both the adsorption capacity and quality remain unaltered.
39. The paper describes the adhesion of algal spores to glass surfaces with different degrees of roughness (surface tension, contact angle and adsorption capacity were taken as indices of roughness).
40. The applicability of the Derivatograph for determining the adsorption capacity of industrial adsorbents, the hydration conditions of cement, the system Ca3A-CaSO4 · H2O and the rehydrability of clay minerals is demonstrated.
41. A study of the effect of varying concentration of dye or clay on the location and intensity of this band proved to be useful in determining the adsorption capacity of the clay.
42. 'There are powerful drivers to develop efficient strategies to remove CO2 using alternative materials that simultaneously have high adsorption capacity, high selectivity for CO2 and high rates of regeneration at an economically viable cost.'
43. Where [q.sub.e] (mg/g) is the amount of dye adsorbed per unit mass of Adsorbate at equilibrium, [C.sub.e] is the concentration of the Adsorbate left in the solution (mg/L), [K.sub.f] is the adsorption capacity at unit concentration, and 1/n is the adsorption intensity.
44. It is an object of the invention to provide a kind of Adsorbing material, it can adsorb ammonia, and there is no big change in volume when in absorption with non-adsorbed, and then the adsorption capacity of ammonia and/or ammonium ion is big, and can also additional function by suitable composition control etc., in the present invention, by metal top cradle is used as ammonia Adsorbing