Nghĩa của từ perpendiculars bằng Tiếng Việt

tính từ
1. (+to) vuông góc, trực giao
2. thẳng đứng; dốc đứng
3. (đùa cợt) đứng, đứng ngay

danh từ
1. đường vuông góc, đường trực giao
2. vị trí thẳng đứng
3. dây dọi; thước vuông góc
4. (từ lóng) tiệc ăn đứng

Đặt câu có từ "perpendiculars"

Dưới đây là những mẫu câu có chứa từ "perpendiculars", trong bộ từ điển Từ điển Y Khoa Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ perpendiculars, hoặc tham khảo ngữ cảnh sử dụng từ perpendiculars trong bộ từ điển Từ điển Y Khoa Anh - Việt

1. For example, ancient Greek temples juxtapose tall vertical columns and wide horizontal entablatures to create rigid perpendiculars.

2. The stations formed the corner points of a rectangular triangle with perpendiculars equal to approximately 10 nautical miles.

3. As completed, the steel-hulled ship was 409ft 5 long (between perpendiculars), 54ft m Abeam, and drew 24ft1 in.

4. Chalmers (1881) "Multiples of Perpendiculars upon U from Centre of Gravity G and from the Antipoles Y and Z .of y and z.— Equations (S) involve

5. At longitudinal strength calculations of the barge, the length between the fore and the aft perpendiculars shall be taken as the length between the fore perpendicular of the barge and the aft perpendicular of the pusher.

6. Note: If the CMPA peak is sufficiently separated from other peaks valley-to-valley baseline allocation should be used, otherwise use dropping perpendiculars to a common baseline, which should have starting point close to the CMPA peak (thus not at t = 0 min!).

7. According to the invention, the crown reinforcing structure also comprises a layer of circumferential reinforcing elements (8), which is disposed radially outside the carcass-type reinforcing structure (2). Moreover, along the profile of the tyre in a radial plane, in the part thereof that is radially outside the two points of tangency of the curvilinear abscissa of the carcass-type reinforcing structure with perpendiculars (100, 101) to the axis of rotation, at least one layer (6, 7) of working reinforcing elements is at least partially-radially inside the part of the carcass-type reinforcing structure (2) that is radially outside the two points of tangency of the curvilinear abscissa of the carcass-type reinforcing structure with perpendiculars to the axis of rotation.