Nghĩa của từ impellers bằng Tiếng Việt

danh từ
1. người thúc đẩy; vật thúc đẩy
2. (kỹ thuật) bánh công tác

Đặt câu có từ "impellers"

Dưới đây là những mẫu câu có chứa từ "impellers", trong bộ từ điển Từ điển Y Khoa Anh - Việt. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ impellers, hoặc tham khảo ngữ cảnh sử dụng từ impellers trong bộ từ điển Từ điển Y Khoa Anh - Việt

1. Adjustable Pitch Impellers, Backswept (Models BSA, BSP) – Catalog 567 Adjustable Pitch Impellers (Model AHX) – Catalog 524

2. Impellers and motor drives for mixers, agitators, aerators for mixer drives and mixing operations, and mixers

3. Impellers, shaft, stator vane, nozzle, intake grate, marine shafts and parts and fittings therefor

4. We carry out strain gauge measurements to determine stress on components - typically at our impellers and casings.

5. Agitation is provided by means of the rotary mixer with its mixing impellers in each of the sequential reaction zones.

6. The internal flow in 2 centrifugal impellers with radial and Backswept discharge, but otherwise identical design, has been investigated at tip speeds of 300 m/s

7. The blower includes a motor to drive impellers, wherein the motor is secured to a frame coupled within the housing in a manner to substantially enhance aerodynamic performance of the blower.

8. Centrifugal Chillers consist of the usual evaporator, compressor, condenser, and expansion device set-up but with additional rotating impellers which compress the refrigerant and transport it around the system.

9. Cavitation is a common problem in pumping systems, but with proper pump sizing, pipe design, and care of filters and strainers, damage to pumps and their impellers can be largely avoided

10. Turbine engine components, namely turbine blades, fans, shafts, combustion chambers, compressors, afterburners and nozzles, exhaust nozzles and manifolds, disks, shrouds, airfoils, and impellers, engine mounts, fuel injection systems, lift fan clutches and drive shafts, nacelles, inlets, cowls, thrust reversers, exhaust nozzles, and air intake inlets

11. Centrifugal fans having forward or backward curved blades tend to produce a spectrum which falls at approximately 5 dB per octave with increasing frequency, although there is a tendency for backward curved impellers to generate more energy at high frequencies and correspondingly less at low frequencies.

12. b. agitators for use in reaction vessels or reactors specified in 2B350.a.; and impellers, blades or shafts designed for such agitators, where all surfaces of the agitator that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials: