Nghĩa của từ control line bằng Tiếng Việt
Dòng đối chứng
Đặt câu có từ "control line"
1. Competition Regulations Control Line Precision Aerobatics 4 5
2. Air propellers (Airscrews) for control line aerobatic F2B models airplanes - "Discovery Universal" "Discovery Universal" - Light wooden aircraft wind propellers (Airscrews), for control line F2B aerobatic models planes
3. In the control line between the coupling head and the trailer relay emergency valve."
4. The control line can be coiled within the contraction joint to accommodate the changing length.
5. Byte # bits # of # set to # b to indicate to the trailer that a pneumatic control line is available
6. Byte # bits # of # set to # b to indicate to the trailer that a pneumatic control line is not available
7. Where the trailer braking system supports the electric control line, check that message # byte # bits # to # are set to # "
8. The Capenhurst control line flyers formed in 1985 in a bid to recreate the golden days of their youth.
9. Byte #, bits # – # of EBS # set to #b to indicate to the trailer that a pneumatic control line is available
10. Where the trailer braking system supports the electric control line, check that message # byte # bits # to # are set to
11. Where the trailer braking system supports the electric control line, check that message EBS# byte # bits # to # are set to
12. The actual experiment results show that under the proposed control, line-tracking robot can effectively sashay , swerve and so on.
13. Byte #, bits #-# of EBS # set to #b to indicate to the trailer that a pneumatic control line is not available
14. Makebreak dialing is accomplished by applying dialing pulses to the same control line as connects to the line-seizing switch.
15. In both cases, the reference value (abscissa of the diagrams) will be the value of the transmitted pressure in the control line:
16. Byte 3, bits 5 - 6 of EBS 12 set to 01b to indicate to the trailer that a pneumatic control line is available.
17. Byte # bits # of # set to # b to indicate to the trailer that the electric control line signal is generated from two independent circuits
18. Byte 3, bits 5 – 6 of EBS 12 set to 01b to indicate to the trailer that a pneumatic control line is available.
19. Where the trailer braking system does not support braking via the electric control line check that message # byte # bits # to # are set to
20. Promotion in the Air Res will normally be limited to members above the Quality Control Line (QCL) established by the applicable merit board.
21. Byte #, bits #-# of EBS # set to #b to indicate to the trailer that the electric control line signal is generated from two independent circuits
22. Where the trailer braking system supports the electric control line, check that message EBS22 byte 4 bits 7 to 8 are set to 01.’
23. Where the trailer braking system does not support braking via the electric control line check that message EBS# byte # bits # to # are set to
24. Byte 3, bits 5-6 of EBS 12 set to 00b to indicate to the trailer that a pneumatic control line is not available.
25. Byte 3, bits 5-6 of EBS 12 set to 01b to indicate to the towed vehicle that a pneumatic control line is available.
26. Byte 3, bits 5-6 of EBS 12 set to 00b to indicate to the towed vehicle that a pneumatic control line is not available.
27. The method of holding the model for the pull test as specified in the Control Line General rules shall not apply to CL Precision Aerobatics…
28. Where the trailer braking system supports the electric control line, check that message EBS 22 byte 4 bits 7 to 8 are set to 01."
29. Where the trailer braking system supports the electric control line, check that message EBS 22 byte 4 bits 7 to 8 are set to 01.
30. Where the towed vehicle braking system supports the electric control line, check that message EBS 22 byte 4 bits 7 to 8 are set to 01.
31. Loss of control line pressure allows the weight of tubulars bearing on the upper housing or rods to move it to put the tool in another position.
32. Where the trailer braking system does not support braking via the electric control line check that message EBS22 byte 4 bits 7 to 8 are set to 00.
33. Byte 3, bits 1-2 of EBS 12 set to 01b to indicate to the trailer that the electric control line signal is generated from two independent circuits.
34. Where the trailer braking system does not support braking via the electric control line check that message EBS 22 byte 4 bits 7 to 8 are set to 00.
35. A first control line (1) is used to send an acknowledge signal (Ready), with which one or more units addressed by a first unit acknowledge accesses in access cycles.
36. Where the towed vehicle braking system does not support braking via the electric control line check that message EBS 22 byte 4 bits 7 to 8 are set to 00.
37. For towed vehicles equipped with only an electric control line, the response to messages defined in EBS 12 of ISO 11992-2:2003 and its Amd.1:2007 shall be checked as follows: