Nghĩa của từ angle of shear bằng Tiếng Việt
danh từ
góc trượt, góc dịch chuyển; góc cắt
Đặt câu có từ "angle of shear"
1. Shear angle Y
2. Shear angle X
3. The statistical distribution of magnetic shear angle in the ascending phase of solar cycle
4. The shear rate variation has been accomplished on varying the tube angle of inclination.
5. The code reproduces shear band inclinations which depend on both the angle of friction and the angle of dilation. Localization occurs at the yield point.
6. Post-anatectic deformations are seen as snyformal structure, low angle shear zones and mylonitisation (third episode).
7. The angle of incidence of the X-ray runs parallel to the axis of rotation and therefore perpendicular to the shear gradient.
8. To Characterize the shear softening deformation of the grain contact: (5) τ = u s k si 1 + u s k si / τ S τ < c + σ n tanφ σ n tanφ when slipping where τ, u s, τ S, k si, c, and φ denote the shear stress, shear displacement, parameter controlling nonlinear shear deformation, initial shear stiffness, cohesion, and friction angle of the
9. The loading angle was varied from a pullout direction to a shear load acting perpendicular to the axis of the screw.
10. The mean value of the peak shear strength angle (arctanτ/σn) for the same 100 joints was estimated to within 1/2°.
11. All important effects like blade twist, shear deformation and rotary inertia for bending, effect of centrifugal force and stagger angle are taken into account.
12. Shear algorithm
Thuật toán kéo cắt
13. Shear layer
14. Shear factor
15. A detailed structural analysis of an Anastomosing shear zone network in metagabbros from the Archean Rainy Lake zone (Canada) revealed the existence of prevalent dextral and minor sinistral conjugate shear zones with the obtuse angle (>130°) facing the main shortening direction.
16. Relevant parameters to be considered are: granulometry, plasticity, density and water content, degree of compaction, shear strength and angle of friction, permeability and void ratio, compressibility and consolidation.
17. Shear-jashub (3)
18. Relevant parameters to be considered are: granulometry, plasticity, density and water content, degree of compaction, shear strength and angle of friction, permeability and void ratio, compressibility and consolidation
19. The angle (alpha) corresponds to the position in which a patient's ankle joint is blocked for reducing the shear stresses acting on ulcer lesions.
20. Our low-shear Agitator, the RotoMAXX II, is designed with a right angle helical bevel gearbox and can handle volumes up to 60,000 gallons
21. Simultaneous shear and denaturation of nucleic acids
22. Using the shear resistance – shear displacement data from undrained monotonic ring shear tests and several processed horizontal earthquake accelerograms, the minimum peak earthquake acceleration necessary to cause a catastrophic shear failure under various seismic waveforms was estimated for conditions of no shear stress reversals on the sliding surface.
23. Shear Amazement, Kitchener, Ontario
24. Angle synonyms, Angle pronunciation, Angle translation, English dictionary definition of Angle
25. The camber of the plate after cutting in disc type shear is reduced by adding hydraulic movable pusher in front of the shear and adjusting the side guide roller behind the shear.