Nghĩa của từ x-axis bằng Tiếng Hàn

[]
noun - X-axis
평면의 횡축: X-axis
엑스축: X-axis

Đặt câu có từ "x-axis"

1. Flip on & X Axis

2. Jog X- axis from end- to- end, stopping in the middle, to check X- axis roll

X 축에서 x 축 롤 검사를 중간에 중지 끝에 조깅

3. Let's see, that's my x- axis.

자 이게 제 x축입니다.

4. There's an x-axis bionumeric algorithm.

5. Next, remove the two X- axis shipping blocks holding the ram in place in the X- axis direction

6. Asymptote The x-axis and y-axis are Asymptotes …

7. Now let's do the same for the x- axis.

이제 x축에 대해서도 똑같이 해 봐요.

8. That's my y-axis; this is my x-axis.

내가 단위원을 그려 보겠다. 저것은 Y축이고, 이것은 X축이다.

9. Apply Affine scaling on the x-axis to input data

10. They're both at the same level below the x- axis.

x축으로부터 아래로 같은 거리만큼 떨어져 있어요

11. Jog the turret to the middle of X- axis travel

12. This is the horizontal axis over here is the x axis

13. You can see this is the x- axis, the y- axis.

여기에 x축과 y축이 있는 것이 보이시죠

14. I made my x- axis a little shorter than I needed to.

X축을 더 길게 그려야 겠네요

15. Positive aileron deflection produces an anti - clockwise moment about the X axis.

16. Overall 'positioning accuracy' on the x-axis more (worse) than 30 μm.

17. I could draw it as a dotted line over our x- axis.

이 x축에 점선으로 그리겠습니다

18. Distance a locates the focus of the parabola on the x axis.

19. Left triangle along the Y axis rotation, along the X axis Quadrilateral rotation.

20. Asymptote The x-axis and y-axis are Asymptotes of the hyperbola xy = 3

21. Or another way to put it is, this never does intersect the x- axis.

22. The Cartesian coordinate plane consists of two perpendicular lines, x-axis and y-axis

23. The next step is to make the font of the x axis a bit bigger.

24. And one radius is going to be the positive x- axis between 0 and 1.

25. We only specify the Y axis X axis will be little used for this community.

26. And it intersects the x axis when f of x is equal to 0, right?

라고 말하는 것과 같습니다 그리고 f( x) 가 0일 때, f( x) 는 x축과 교차하게 됩니다, 맞죠?

27. Question: A Bar Of Length It Coincides With The Interval [0, 1] On The X-axis

28. Autocratization episode and the x-axis the EDI score at the fi nal year of Autocratization

29. X axis and Y axis adopt ball spiral rods with excellent precisions and low friction factors.

30. Jog X- axis to sweep the table over a distance of twenty inches ( 20 " or 500mm )

31. So if all the y values are negative, we have to say below the x- axis.

32. And just to make it clear, this right here is the x- axis on my graph paper.

그리고 확실히 하기 위해, 여기 모눈종이 위의 이 직선이 x축입니다.

33. I don't know actually where this does intersect the x- axis or if it does it all.

모릅니다 하지만 저는 이 함수의 최소점의 x값을 알아내고 싶습니다

34. So we are only going to be able to graph this function in the positive x- axis.

따라서 우리는 x가 양수인 구간에 대해서만 그래프를 그릴 수 있겠군요 이것은 정리되었고, x는 25까지 커지니까

35. Steel printing platform, X - axis, Y axis precision fine - tuning the handle, easy version of the Register.

36. The x axis of this graph is the Churn of the file - lower, or left, is better

37. The two sp orbitals are linear with 180° angles and occupy the x-axis (cartesian coordinate system).

38. It is the distance from the y -axis measured parallel to the x -axis Also : Absciss, Abscisse.

39. So really, the smallest of these are going to produce a point closest to the x- axis.

여기에는 음수가 하나도 없거든요. 그러니까 사실상 이들 중 가장 작은 수가 x축에 가장 가까운

40. Where the line intersected the x- axis, y is 0, because we're not above or below it.

선이 x축과 만나는 지점, 즉 y가 0일때의 지점도 마찬가지로

41. Jog X- axis to the middle of travel and Y- axis to full negative travel to provide clearance

42. Attach leveling tool T- 2192 to the spindle housing with the precision level parallel to the X- axis

43. So if those are my coordinate axes right there, that's my x- axis, that is my y- axis.

이 것들을 좌표축이라 한다면 여기가 x축, 여기가 y축이 되죠

44. The parabola has the important property of reflecting to its focus all lines parallel to the x axis.

45. X-Axis definition is - the Axis in a plane Cartesian coordinate system parallel to which abscissas are measured.

46. An Audiogram is set up as a chart with the horizontal X-axis representing frequencies, or Hertz (Hz)

47. (33) 33 product ratings - AS-250 X AXIS POWER FEED KNEE MILLS FOR Bridgeport MILLING MACHINE 0-200 RPM

48. An example of an Abscissa is the measurement along the y-axis parallel with the x-axis to point p.

49. - a plane parallel to the Y axis, passing through V1 and at an upward angle of 3o from the X axis,

50. — a plane parallel to the Y axis, passing through V1 and at an upward angle of 7° from the X axis;