Nghĩa của từ tensile bằng Tiếng Hàn
[-ˌsīl,ˈtensəl]
adjective - tensile
잡아늘일 수 있는: tractile, tensile
긴장의: tensive, tensile
Đặt câu có từ "tensile"
1. (4) Bending and tensile strength
2. Viscosity, elasticity, and tensile strength.
점도, 탄력성, 그리고 장력
3. Key words: concrete, accelerated strength, tensile strength, admixtures, curing, splitting tensile strength, modulus of rupture, strength correlations.
4. Bslm-8BP-62: Typical Tensile Values
5. Filament density steady and tensile force.
6. The composition gives a cured article improved in tensile strength, tensile shear bonding strength, and adhesion to various adherends.
7. Portable sander having novel abrasive sheet tensile stress
8. “Alkalised jute fiber tensile properties,” BioResources 4(2), 566-588
9. Cellulose has been described as a “tensile material without peer.”
10. A ratchet spring provides tensile force to the ratchet pawl.
11. 13 Feature: excellent sealing and flexibility, tensile moderate, with static electricity.
12. Relieving the tensile pressure on the cable triggered aeroelastic flutter.
13. Bimanal Osn electrolysis Tensile performance of smart lapse and voluntary sterilization.
14. 7 To measure tensile strength and breaking elongation of single yard.
15. According to the present invention, the complex improves the adhesive force between a metal and a resin, and as for tensile strength, even after thermal shock tensile strength is maintained.
본 발명에 따른 결합체는 금속과 수지 간의 점착력을 개선시키고, 인장강도, 열충격 후에도 인장강도가 유지되는 효과가 있다. 또한 수지와의 결합력을 증대시키기 위하여 전처리, 적절한 표면 거칠기, 열처리, 표면코팅 등의 방법을 사용하고 니켈과 트리아진 티올계 유도체를 이용함으로써 금속과 수지와의 결합력이 우수한 금속-수지 결합체를 제공할 수 있다.
16. The allowable change in tensile strength should not exceed + 25 per cent.
17. The allowable change in tensile strength should not exceed +25 per cent.
18. minimum elongation at fracture of the metal chosen under tensile stress in %.
19. The allowable change in tensile strength shall not exceed +25 per cent.
20. These compressive stresses compensate for the tensile stresses produced by the bonding process.
21. Key words: code calibration, geometric properties, reliability, steel, tensile strength, yield strength.
22. As it only takes place under tensile stress, the plane of the Crazing …
23. Strain-Ageing is known to cause an increase in yield strength and ultimate tensile strength of reinforcing steel bars, while tensile elongation capacity will be less in strain-aged steel bars
24. Blackcap Admix Contractor Strength provides increased strength, resiliency and compressive and tensile PSI
25. Acetal is an engineering thermoplastic with high tensile strength, stiffness and fatigue endurance
26. 1 For the tensile strength of monofilament spun by arachnids was the key.
27. Longitudinal tensile forces from starting and acceleration, as well as compression from braking.
28. 15 The structure and tensile property of bast fiber of hibiscus was studied.
29. Method of concreting expanded hole for a construction pile and a tensile member
건설공사용 말뚝 및 인장부재를 위한 천공 확대부 콘크리트 시공방법
30. Acoustic pressure transferred to the plate results in tensile strain of the flexible extensions.
31. ● Bone has been described as “an engineering masterpiece of tensile, compressive and elastic strength.”
32. Biaxial geogrids are geosynthetic materials formed into a grid of integrally connected tensile elements
33. Admix 500 is used to increase tensile, bond, and flexural strength of approved products
34. Acoustic pressure communicated to the plate results in tensile strain of the flexible extension.
35. Witte specializes in precision machining of all size parts in high-tensile aluminium alloys.
36. Above 35% of the tensile strength at the loading age, the material exhibited viscoplastic behaviour.
37. || Number of bow anchor chains || Length of each chain || Tensile strength of each chain ||
38. || Number of stern anchor chains || Length of each chain || Tensile strength of each chain ||
39. Increasing the thickness of the adhesive layer had no significant influence on tensile bond strength.
40. A tensile stress opens the crack and pulls it through the slide resulting in fracture.
인장 응력은 균열을 벌리고 잡아당겨 결국 슬라이드가 부서지게 됩니다.
41. Tensile strength and flexibility have been assessed with the aid of a four point bending configuration.
42. They exhibit improved adhesion to various substrates, increased tensile strength and improved resistance to cracking.
43. Under excessive tensile strain, the tubes will undergo plastic deformation, which means the deformation is permanent.
44. Since the concrete expansion part is formed on the end of the construction pile or tensile member, the allowable bearing capacity of the construction pile or the pulling resistance of the tensile member can be significantly improved.
본 발명은, 건설공사용 말뚝 및 인장부재에서의 선단 콘크리트 시공방법에 있어서, 지반을 깊이방향으로 천공하고 필요에 따라 천공홀에 공벽유지용 관형케이싱을 설치하는 제1 단계와, 천공홀의 선단을 공벽확장용 도구로 확공하여 미리 설계한 규격의 확공부를 형성하고 확공 측벽까지 포함 가능한 확공부의 상부 원지반을 상부지반 지지체로 지지하는 제2 단계와, 천공홀 선단의 확공부에 콘크리트를 타설하여 미리 설계한 규격의 확대부 콘크리트를 형성하는 제3 단계로 이루어지는 것으로 건설공사용 말뚝이나 인장부재에서의 선단 확대부 콘크리트를 시공함으로써, 말뚝의 허용지지력이나 인장부재의 인발저항력을 획기적으로 개선하는 것이다.
45. Conversely, low to moderate tensile strain and stress is associated with direct repair, or intramembranous ossification.
46. Ductility . A ductile material is one which can be drawn out permanently by a tensile force.
47. 11 The condition of uniaxial stress is approximated in prismatic bars subjected to pure axial tensile.
48. These include tensile strength, wet and dry tear strength, burst strength, air permeability, seal strength and integrity.
49. Amosite tensile strength and heat resistance made it a common additive for structural steel, as well
50. Flatwise tensile testing is used to measure bond strength of adhesives according to ASTM C297-61.