Nghĩa của từ steels bằng Tiếng Anh
This shining metal was not raw iron but hard steel , which bent the softer wrought-iron blades of the Gauls.
I speak quickly, steeling myself for a mean reply
Đặt câu với từ "steels"
1. Stainless steels and other rust-proof, acid-resistant steels
2. The range of materials extends from austenitic stainless and acid-resistant steels to heat-resistant steels and also Duplex steels to high-alloy fully austenitic steel analyses.
3. Specialty steels, especially engineering steels (carbon and alloyed) preferably in the form of round and square rolled bars
4. Engineering services, including, precision machining of components in specialist alloys, aluminium, stainless steels and carbon steels
5. Atomization is the dominant method for producing metal and prealloyed powders from aluminum, brass, iron, low-alloy steels, stainless steels, tool steels, superalloys, titanium alloys, and other alloys
6. Properties of steels and their applications II Characteristics of Acicular ferrite, micro-alloyed carbon steels, and multiphase steels will be discussed with information on their production and applications
7. Welcome to Avesta Steels & Alloys
8. Waste and scrap of other alloy steels
9. Cementite is one of the most important phases in steels, which plays a critical role in the mechanical properties of steels
10. Cold-finished carbon and alloyed engineering steels
11. Steels used in the construction of shells shall have an elongation at fracture, in %, of not less than 10000/Rm with an absolute minimum of 16 % for fine grain steels and 20 % for other steels.
12. Carbon steels exist in three stable crystalline phases.
13. “Steels used in the construction of shells shall have an elongation at fracture, in %, of not less than 10 000/Rm with an absolute minimum of 16% for fine grain steels and 20% for other steels.”.
14. Steels used in the construction of shells shall have an elongation at fracture, in %, of not less than 10 000/Rm with an absolute minimum of 16% for fine grain steels and 20% for other steels.
15. "Steels used in the construction of shells shall have an elongation at fracture, in %, of not less than 10 000/Rm with an absolute minimum of 16% for fine grain steels and 20% for other steels.".
16. 12 It is an important carbide stabilizer in making steels.
17. Butting is one of the leading processors of stainless steels
18. We weld parts of aluminium, magnesium and structural steels.
19. It is an important carbide stabilizer in making steels.
20. Aluminized steels can also be a cost effective alternative to stainless steel since they frequently maintain their appearance better in service than do 409-type stainless steels
21. Our catalog includes Banjos, guitars, lap steels, mandolins, ukuleles and more.
22. Butting : Butting is one of the leading processors of stainless steels
23. - mechanical materials: use of precipitation-hardenable steels, influence of heat treatment,
24. Characteristics, properties and identification of common alloy steels used in aircraft;
25. Speciality steels resistant to corrosion in air, water and sea water
26. Heat treated and non heat treated carbon and alloyed engineering steels
27. Even in these small portions, more than 43,000 tonnes of molybdenum are used each year in stainless steels, tool steels, cast irons, and high-temperature superalloys.
28. 29 These steels are aged hardenable martensitic steels. The superior combination of strength and toughness is achieved through precipitation of fine M_2C alloy carbide by quenched and aged treatment.
29. Easy-to-use compound Case hardens plain and low carbon alloy steels
30. 16 As a result , austenitic stainless steels are inapplicable in seawater environment.
31. Nitrogen as alloying element of corrosion resistant steels enables remarkable properties.
32. Borazon {CBN} wheels are most commonly used in grinding tool steels and high speed steels of 50Rc and greater All items are new in original manufacturer's packaging {unless otherwise noted}
33. These steels are aged hardenable martensitic steels. The superior combination of strength and toughness is achieved through precipitation of fine M_2C alloy carbide by quenched and aged treatment.
34. In carbon steels and cast irons, Austenite resists temperatures exceeding 723° C.
35. 30 Stress Effect on the Spectrum of Magnetic Induced Waveform in Ferromagnetic Steels.
36. Tool steels may have retained Austenite in the range of 5-35%.
37. (a) Characteristics, properties and identification of common alloy steels used in aircraft;
38. Aluminizing or aluminum diffusion alloying is an economical process for inhibiting such corrosion by protecting the surface of steels, stainless steels and nickel alloys operating in severe high temperature environments
39. The chemical composition of all steels shall be declared and defined at least by:
40. Steel forgings for pressure purposes — Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
41. Niobium ferroalloy and niobium additive for steels, cast irons, and other metallic alloys
42. Cogent works closely with clients in all applications requiring electrical steels and magnetic materials for …
43. Steel forgings for pressure purposes — Part 4: Weldable fine grain steels with high proof strength
44. teels used in the construction of shells shall have an elongation at fracture, in %, of not less than # m with an absolute minimum of # % for fine grain steels and # % for other steels
45. We describe some specific features of the diffusion Borating of steels in Na-B melt
46. About our Service * Capos * 5th string capo * Dobro capo • FineTune Capo • Steels and Slides; Custom
47. In alloy and high-alloy special and engineering steels we rank among the top ten.
48. Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
49. Glow discharge spectroscopy is an established method for the characterization of steels and varnishes.
50. Synonyms for Anneals include hardens, indurates, steels, strengthens, tempers, toughens, case-hardens, forges, galvanises and galvanizes