Nghĩa của từ rpm bằng Tiếng Anh
Đặt câu với từ "rpm"
1. Rudder angle, rpm, pitch indicator
2. At 86 HP @ 6,250 rpm, this is an incredible 13% more peak power than the original Bobber, with more power delivered from 3,500 rpm all the way up to the rev limit, which is 500 rpm higher at 7,500 rpm.
3. Location of Folders Containing RPM Packages
4. Ripoff Report on: RPM Debt Collecting Agency - Rpm receivables performance management harrassing phone calls abusive language Accusatory statements evasive answe
5. Maximum test speed at ADC input [rpm]
6. The butter serum is agitated at a speed of 25 rpm to 50 rpm for 30 minutes to 60 minutes.
7. Revolutions per minute (abbreviated rpm, RPM, rev/min, r/min, or with the notation min−1) is the number of turns in one minute.
8. Implementing the new 6.5 WBY RPM, the Backcountry weighs in …
9. Centrifugal Supercharger Kits Increase power at high rpm without increasing cylinder pressures at lower rpm with a high performance Centrifugal supercharger kit from Summit Racing.
10. 2.0 Ah 2.0 Ah 2.0 Ah 4.0 Ah Cordless Brushless - - - Lightweight 2.2 lb 5.9 lb 7.16 lb 4.4 lb Torque - 350 in-lb 2652 in-lb - Charge Time 1.5 hour 1.5 hour 1.5 hour 1.5 hour No Load Speed 0-20000 rpm 0-1350 rpm 0-2800 rpm 0-20000 rpm Use Scene
11. Adjustable rod homogenizer (# mm shaft diameter), rpm range # to
12. Retarder rotor speed [rpm] (see paragraph 5.1 of this Annex)
13. The RPM handles all types of paper stocks and book blocks.
14. RPM Express Couriers is a full-service logistics solution company
15. Carburetor size = engine size × max rpm × efficiency ÷ 3456
16. airborne acoustical noise emissions during washing/spinning (900 rpm) : not available;
17. Additional angle drive gear drag torque at x rpm [Nm]
18. Burnishing floors is done with a rotary machine that has a pad speed of more than 1000 rpm but more commonly done at 1500 to 2000 rpm
19. And we'll keep the spindle speed below the recommended 900 rpm
20. Taddx=Additional angle drive gear drag torque at x rpm [Nm]
21. Amping up support for the RPM Act-- The bipartisan RPM Act protects the right to convert an automobile or motorcycle into a racecar used exclusively at the track.
22. My L3130 Abruptedly dropped rpm to 1300 & I cannot increase it
23. airborne acoustical noise emissions during washing/spinning (1 600 rpm) : not available;
24. (d) airborne acoustical noise emissions during washing/spinning (1 600 rpm): not available;
25. Love Explosion/Bazuka Limited (VG+ 45 rpm) by Bazuka Jan 1, 1975
26. Most Camshaft manufacturers will list the optimum rpm range on each Camshaft
27. The horsepower of this engine doesn't stand out until above 11,000 RPM.
28. The tubes are then centrifuged at # rpm for # minutes at room temperature
29. Set your chuck pressure based on the highest rpm in your program
30. Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8
31. Initially created for Debain, Aptitude extends its functionality to RPM based distributions as well.
32. Variations of centrifugation time (t) versus centrifugation speed (rpm) for different soil densities (ρs
33. Operational checks for power and rpm, magnetos, fuel and oil pressure, engine temperatures.
34. Custom Type Cgii - 6811 / 6813 Frames - 1200 RPM and Slower 10 9/96 Custom Type FOD - 809 / 8010 / 8011 / 8012 Frames 11 9/96 Custom Type Cgii - 1122 / 1124 Frames - 3600 and 1800 RPM 12 9/96 Custom Type Cgii - 1122 / 1124 Frames - 1200 RPM and Slower 13 9/96 Part 1.3 Horizontal - …
35. Blood bag centrifuge Precision RPM meter plus stopwatch to control speed, acceleration and retardation.
36. Adjustable rod homogenizer (10 mm shaft diameter), rpm range 8 000 to 20 000.
37. Anima -2LP (12" album, 33 rpm) by Thom Yorke Jul 19, 2019
38. — Operational checks for power and rpm, magnetos, fuel and oil pressure, engine temperatures.
39. RPM International offers different types of Crankshafts — 4130/5140 Forged and 4340 Forged
40. RPM represents the estimated earnings that you'd accrue for every 1,000 impressions you receive.
41. Network B has the highest RPM and appears to be outperforming the other networks.
42. Jeep Wrangler Engine Annihilated After Being Towed In 4-Low, Revving To Over 50,000 RPM
43. Adjustable rod homogenizer (10 mm shaft diameter), rpm range 8 000 to 20 000
44. Fasco D7909 1075 RPM 1/4 HP 208/230-Volt AC Condenser Fan Motor
45. Looking for Blower, 549 cfm, 115V, 2.05A, 1640 rpm? Find it at Grainger.com®
46. Evaluation of RPM oak seedlings in Afforesting floodplain crop fields along the Missouri River
47. The impression revenue per thousand impressions (RPM) is the average earnings per one thousand impressions.
48. The record sleeves state that the proper playing speed for Conqueror Records is 80 rpm
49. Revenue per 1000 impressions (RPM) represents the estimated earnings you'd accrue for every 1000 impressions you receive.
50. Impression RPM = (Estimated earnings/number of queries from Matched content units with ads enabled) * 1000