Nghĩa của từ quenched bằng Tiếng Anh

Đặt câu với từ "quenched"

Dưới đây là những mẫu câu có chứa từ "quenched", trong bộ từ điển Từ điển Tiếng Anh. Chúng ta có thể tham khảo những mẫu câu này để đặt câu trong tình huống cần đặt câu với từ quenched, hoặc tham khảo ngữ cảnh sử dụng từ quenched trong bộ từ điển Từ điển Tiếng Anh

1. So the Spirit can be quenched!

2. Her letter quenched his hope.

3. They had been desires to be quenched, as he had quenched other desires over the years.

4. Cell staining with air quenched steam heating

5. I walk Awryfrom their meetings encouraged and quenched

6. The blaze was quenched by the brave firemen.

7. Mr. Roosevelt's reply quenched my last hopes.

8. One more ray of hope had been quenched.

9. The fire was quenched with a bucket of water.

10. She quenched her thirst with a glass of Coke.

11. This has to be quenched by detachment and renunciation.

12. Chinked synched zincked chanced quenched squinched coincide snicked Accinged zinced

13. The dusts generated when dry quenched coke is handled should be reduced.

14. To quench steel is that hot steel is quenched to harden it.

15. The good service results were achieved using laser quenched roughing roll in practical production.

16. I quenched the candle flame with my fingers and slid into the bed chamber.

17. Some little flames may be individually quenched, but there is a certain pattern to them.

18. The improvement is marginally larger for the air-cooled than for the quenched samples.

19. But later that year Arborise moved on again, his desire to explore not yet fully quenched

20. Air-cooled and quenched samples do not have any significant differences in these macroscopic mechanical properties.

21. The invention is directed to a composition suitable for high gloss air quenched blown films.

22. While life as a sailor was harsh, his thirst for the sea was not quenched.

23. Samples from the reaction mixture are removed and quenched by running into ice cold water.

24. A great thirst is a great joy when quenched in time. Edward Abbey 

25. 23 The good service results were achieved using laser quenched roughing roll in practical production.

26. The tertiary amines become quenched by the carboxylic acids and thus do not exhibit heat destabilization.

27. The saturated Tg of the ground sample was the same as that of the liquid-quenched glass.

28. She covered Sisera with a blanket, quenched his thirst with curdled milk and waited until he fell asleep.

29. 16 The V2O5 sol was prepared with V2O5 melt quenched, and PEO-V2O5 xerogel nanocomposite films were obtained.

30. The foamed pellets are air-quenched to a temperature below their dilatometric softening point and then cooling to room temperature.

31. Excess enthalpies of the ground amorphous solid and liquid quenched glass over that of the hypothetical equilibrium liquid were determined calorimetrically.

32. No significant difference between the ground and liquid-quenched amorphous solids was found in the X-ray diffraction patterns.

33. “Quenched the violence of fire, escaped the edge of the sword, ... waxed valiant in fight, turned [armies] to flight ...

34. This retained Austenite occurs when the steel is not quenched to a temperature low enough to form 100% martensite

35. The results show that the properties of the slak quenched rails are matchable or superior to that of the imported rails.

36. Results show that the excited triplet state of ketocon-marin derivatives can be quenched by iodonium salts through the mechanism of electron transfer.

37. The fluorescence of Atebrin [3‐chloro‐9‐(4‐diethylamino‐1‐methyl butyl)‐7‐methoxyacridine] in a suspension of chromatophores was quenched in the light

38. We use this property of glasses in a temperature profile that develops from glass rapidly quenched to generate the surface stresses in a Prince Rupert's drop.

39. The resulting hot effluent gas is effectively air quenched in the choke portion and passed with the additional air to a secondary combustion chamber (30).

40. Hardox 600 quenched and tempered martensitic phase low alloy abrasion resistant discrete plate with Brinell hardness of 600 in thickness range 10 mm to 30 mm.

41. The compressive surface stress is tough in the glass because any bending load has to overcome quenched compressive stress before there's a net tensile stress on the surface.

42. These steels are aged hardenable martensitic steels. The superior combination of strength and toughness is achieved through precipitation of fine M_2C alloy carbide by quenched and aged treatment.

43. 43 It is better for thee, to enter halt into life, than having two feet to be cast into hell; into the fire that never shall be quenched.

44. 29 These steels are aged hardenable martensitic steels. The superior combination of strength and toughness is achieved through precipitation of fine M_2C alloy carbide by quenched and aged treatment.

45. 27 Based on the results of laboratory experiment, the technical parameters of laser quenching process were selected. The roughing roll of Wire Rod Mill at Pangang was laser quenched.

46. Once the surface has undergone crystallization, the strand is thoroughly quenched in a second quench region so that the strand will be ready for pelletization, accumulation or other handling steps.

47. Abrasion resistant plate, quenched, hotrolled alloy steel, with a minimum hardness of 400 HBN up to 600 HBN, and imported under tariff code 7225.40.90.19 ("DILLIDUR" detailed specifications attached to original request).

48. Hardox 400, or equivalent, quenched and tempered martensitic phase low alloy abrasion resistant discrete plate with Brinell hardness of 400, of a thickness smaller than 5 mm or greater than 70 mm.

49. Oil quenched, work-hardening, abrasion resistant alloy steel plate, manufactured under the brand name Endura and the mil1 product names Creusabro 8000 and Creusabro 4000 (detailed specifications attached to original request), and imported under HS tariff code 7225.40.90.19.

50. Steel Safeguard Inquiry Tribunal’s Recommendations for Exclusion Hardox 500, or equivalent, quenched and tempered martensitic phase low alloy abrasion resistant discrete plate with Brinell hardness of 500, less than 5 mm or more than 50 mm thick.