Nghĩa của từ polyamide bằng Tiếng Anh
Generically known as a group of polyamides , nylon is chemically distinguished by its amide linkages to two aromatic rings.
Đặt câu với từ "polyamide"
1. Blister ((Polyamide/Alu/PVC)/Alu
2. To convolute the polyamide film on the cylinder paper tube when pressing the polyamide file using contacting roll .
3. Polylactic acid-polyamide alloy resin composition
4. Thermally conductive polyamide compounds containing laser direct structuring additives
5. synthetic man-made staple fibres of polyamide
6. Continue Reading Definition of Aramid, Aramids Polymers and polyamide synthesis
7. It's a two - component, chromate free, epoxy polyamide adduct shop primer especially designed.
8. The aliphatic polyamide insulation material includes stabilizing compounds and nano-fillers.
9. Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine)
10. Aluminium arc-welded removable receiver dryer with polyamide and ceramic elements with:
11. Natural and synthetic polyamides, inter alia, are used as preferred polyamide components.
12. After careful extraction the extract is fractionated by column chromatography on polyamide.
13. Method for producing fiber-reinforced, flat semi-finished products containing a polyamide matrix
14. High-melting-point polyamide resin composition having excellent vibration characteristics upon water absorption
15. Process for producing a polyamide based on a dicarboxylic acid and a diamine
16. Other articles where Amide group is discussed: polyAmide: …chain are linked together by Amide groups
17. Polyamide acid resin having unsaturated group, photosensitive resin composition using same, and cured product thereof
18. Nomex® Meta-Aramid is an aromatic polyamide with excellent heat & flame resistance
19. Moisture impairs adhesion, so all hygoscopic materials, such as polyamide, should be pre-dried.
20. In first approximation the equilibrium isotherms are verified by taking off the acids from the 6-polyamide.
21. After delution with water the dyes are adsorbed on polyamide-powder, deluted and identified by TLC.
22. 20 Polyamide and silica gel column chromatography was used to isolate and extract the analgesic and antemetic constituents.
23. Separation methods with high pressure liquid chromatography in polyamide or cellulose acetate columns are suitable.
24. coated with polypropylene on one side and with polyamide on the other side with adhesive layers between,
25. Pa 3200Gf - polyamide with 30% of glass powder with a higher hardness and resistance against abrasion.
26. Composition Kevlar® Para-Aramid is an aromatic polyamide that is characterized by long rigid crystalline polymer chains
27. Chrome mordant dyes shall not be used in polyamide and wool fibres and fabrics made of these fibres.
28. Two resins were chosen as film-forming materials: an alkyd and an epoxy-polyamide (1:1) resin.
29. polyamide-epichlorhydrin resin based on adipic acid, diethylenetriamine and epichlorhydrin, or a mixture of epichlorhydrin and ammonia;
30. 14 glycosides of the aglycons quercetin, kaempferol and myricetin were examined for their behaviour in chromatography with polyamide.
31. Polyamide compositions with improved thermo-oxidative, anti-bacterial, light- or energy active properties and method for producing same
32. Conventional materials for non-Absorbable sutures are linen, cotton, silk, stainless steel wire, polyamide (nylon), polypropylene (Prolene) and polyethylene (courlene).
33. To further investigate the role of the N-terminal Acylamido in affecting sequence specificity and binding affinity, six polyamide analogues
34. This bracket is a stainless ring with a low friction polyamide inner lining through which the Bowsprit slides into the “active” position.
35. This bracket is a stainless ring with a low friction polyamide inner lining through which the Bowsprit slides into the “active” position.
36. The acid-content of 6-polyamide can be understood assuming two mechanisms: aNernst-partition and a stronger interaction with active fibregroups.
37. This bracket is a stainless ring with a low friction polyamide inner lining through which the Bowsprit slides into the “active” position
38. Several such chemical modifications of the alkyd resins of commercial importance include vinylated Alkyds, silicone Alkyds, urethane Alkyds, phenolic Alkyds, and polyamide Alkyds
39. The word Aramid comes from a blend of the words "aromatic" and "polyamide" and is a general term for a manufactured fiber in which the fiber forming substance is a long chain synthetic polyamide, in which at least 85% is of amide linkages (-CO-NH-) attached directly to two aromatic rings, (as defined by the U.S Federal Trade Commission.)
40. The bracket is a stainless ring with a low friction polyamide inner lining through which the Bowsprit slides into its "active" position.
41. Anti termite cable sheathing comprising an aliphatic polyamide x.y with x+y>18, an uv absorber and/or uv stabilizer, and an antioxidant
42. In this system, through-dyed, abrasion-proof polyamide tubes (Ø 40 mm or 33 mm) are securely fitted together with corrosion-resistant steel cores.
43. This is a kind of enameled Cu-Al round wire, thermal class with ployesterimide resin as under-coating and polyamide-imide resin as over coating.
44. Different materials (steel, acrylonitrile rubber, polypropylene, polyamide, methyl methacrylate) were treated with aqueous solutions of dodecyltrimethyl-ammoniumchloride, a bactericidal quaternary ammonium compound, and stearyl alcohol oxethylate, a nonionic surfactant.
45. Aramids The most common organic fibres used for reinforcements are the aramid, or aromatic polyamide fibres, with Kevlar® and Twaron® currently the major brands
46. What is Aramid? Aramid is short for ‘aromatic polyamide’ and possesses unique properties in terms of being lightweight, durable, and high resistance to the force of impact
47. The polyamide gelling agent has good stability, even in the presence of acidic antiperspirant metal salts, and can provide a clear deodorant or antiperspirant gel or stick.
48. wool , animal hair (# and #), silk , cotton , flax true hemp , jute , abaca , alfa , coir , broom , ramie , sisal , cupro , modal , protein , viscose , acrylic , polyamide or nylon , polyester and elastomultiester
49. The collaborative project for circularity in plastics founded by polyamide supplier DOMO, materials manufacturer Covestro and Circularise, a supply chain transparency start-up, has reached the first milestone
50. 18 The inclusion of polyamide and alkyl ketene dimmer improved the mechanical properties of methylcellulose, especially the wet tensile strength. Testing of biodegradation activity showed that both St.