Nghĩa của từ flush (with) bằng Tiếng Đức
flush (with) [flʌʃwið] bündig, eben (mit)
Đặt câu có từ "flush with"
1. Between concrete Curbings flush with the road surface
2. 8 Make sure the tile is flush with the surrounding tiles.
3. Only the elite, flush with oil money, could afford the white goods and Japanese sound - systems.
4. Just as with word processing type can be set flush with the left-hand margin, centred or justified.
5. A Countersunk screw is a type of fastening that sits flush with the surface of the material it occupies
6. Once hardened, the repair can be shaped flush with a plane and chisel, before a final finish with abrasive paper.
7. Countersinking a screw helps the screw head lie flush with the surface of the wood to better conceal the hardware
8. Sections (2 and 3) of a meandering wire element (1) are laid end to end and aligned flush with one another.
Teilstücke (2 und 3) eines Mäanderdrahtkörpers (1) sind stirnseitig fluchtend aneinandergelegt.
9. 30 You bury one hemisphere in one bed of sand round end down, flat side flush with the top of the mold.
10. The heavy pine door of room 301 stood ajar, numerals depicted in hand-painted tiles set flush with the white-stucco wall.
11. Its easy-to-clean hob fits flush with your work surface and incorporates four evenly rated burners sealed into two deep spillage wells.
12. Countersinks cut a cone-shaped opening to install screws and rivets flush with a surface or hold workpieces between centers on a lathe
13. Easier to install than other mortise-mount Concealed cabinet hinges, these fit in two drilled holes to mount flush with door and frame edges
14. The Breasthook (see cut list for size) is fitted and cut at angles until it is flush with the sides of the hull and the stem
15. If magnesium oxalate does come in contact with skin or eyes, flush with water for at least 15 minutes and call a physician if irritation occurs.
16. FlushCut™ Burrs are designed so that the cutting flutes are flush with the outer diameter of the shaft for use as a “cutting block” technique.
17. What does Countersink mean? A hole with the top part enlarged so that the head of a screw or bolt will lie flush with or below the surface
18. Travers Tool offers Counterbores typically used when a fastener, such as a socket head cap screw, is required to sit flush with or below the level of a work piece's surface
19. A common use is to allow the head of a Countersunk bolt or screw, when placed in the hole, to sit flush with or below the surface of the surrounding material.
20. Flush with cash from looted banks and in control of oil fields in Syria and Iraq, ISIS had all the elements to sustain itself and carry out attacks on the U.S. homeland and those of our allies.
21. Also known as spotfacers, Counterbores make a flat-bottomed cavity at the top of an existing hole so that a bolt, nut, or other part is hidden beneath or sits flush with the top of the hole when installed into it
22. A Counterbore (symbol: ⌴) is a cylindrical flat-bottomed hole that enlarges another coaxial hole, or the tool used to create that feature.A Counterbore hole is typically used when a fastener, such as a socket head cap screw, is required to sit flush with or below the level of a workpiece's surface.
23. A mating portion (70) extends from the inner face (22) of the elongated housing (14) and is abuttable with a portion of a shelf (16) such that the upper face (26) of the elongated housing (14) is substantially flush with the top face (84) of the shelf (16) to form a continuous extension of the shelf (16).