Nghĩa của từ impactor bằng Tiếng Sec
kladivový mlýn Entry edited by: B2
Đặt câu có từ "impactor"
1. For instance, aggregate production is usually made through a two-stage process involving a jaw crusher or horizontal shaft impactor (HS impactor) at a primary stage, and another crusher, for example cone crusher, HS impactor or vertical shaft impactor (VS impactor) at a secondary stage.
2. Align the impactor accelerometer with its sensitive axis parallel to the impactor longitudinal centre line.
3. 3.3.3. Align the impactor accelerometer with its sensitive axis parallel to the impactor longitudinal centre line.
4. Align the impactor accelerometer with its sensitive axis parallel to the impactor longitudinal centre line
5. 2.3.3. Align the impactor accelerometer with its sensitive axis parallel to the impactor longitudinal centre line.
6. The impactor is equipped with an accelerometer sensitive in the direction of impact and located on the impactor axis.
7. General provisions relating to the mass and velocity of the impactor
8. Force versus angle requirement in static lower legform impactor bending certification test
9. Tolerances of angles for the lower legform impactor at the time of first impact
10. I'm honored to be nominated for the "Industry Impactor" category of Airwards
11. The impact velocity of the impactor when striking the impact position must be #,# ± #,# m/s
12. The strain gauges are located on the impactor on the back of the front member.
13. The inline virtual impactor may further comprise an aspiration section located upstream of the flow accelerator member.
14. The centre line of the impactor must be aligned with the centre line of the rib's piston.
15. the striking face of the impactor is at an angle of #° to the median longitudinal plane of the cab
16. These of course raise little or no dust unless the impactor reaches the ocean floor before detonating.
17. The impactor must be instrumented to measure the bending angle and the shearing displacement between femur and tibia
18. The impactor shall be instrumented to measure the bending angle and the shearing displacement between femur and tibia.
19. The impactor must be instrumented to measure the bending angle and the shearing displacement between femur and tibia.
20. The centre line of the impactor should be aligned with the centre line of the rib's guide system.
21. The centre line of the impactor should be aligned with the centre line of the rib's guide system
22. Christopher Chyba and others have proposed a process whereby a stony meteorite could have exhibited the behaviour of the Tunguska impactor.
23. Impact explosions begin with the nearly instantaneous conversion of the kinetic energy of motion of the impactor into heat.
24. This does not require that the impactor itself be able to physically bend and shear to these angles and displacements.
25. 21 Impact explosions begin with the nearly instantaneous conversion of the kinetic energy of motion of the impactor into heat.
26. the striking face of the impactor is at an angle of 20° to the median longitudinal plane of the cab.
27. Deviation from the limits of the force-deflection corridors characterising the rigidity of the impactor — as defined in Appendix 2 — may be allowed provided that:
28. The impact direction is perpendicular to the anterior-posterior axis of the dummy and the axis of the impactor is aligned with the centre of the middle force transducer.
29. Deviation from the limits of the force-deflection corridors characterizing the rigidity of the impactor - as defined in this Appendix, Figure 2 - may be allowed provided that:
30. Deviation from the limits of the force-deflection corridors characterizing the rigidity of the impactor, as defined in this Appendix, Figure 2, may be allowed provided that:
31. The impact direction is perpendicular to the anterior-posterior axis of the dummy and the axis of the impactor is aligned with the centre of the middle abdominal force transducer
32. When the flexible lower legform impactor is used for a test according to paragraph 1.3.3, the absolute value of the maximum bending moment of the tibia at:
33. Deviation from the limits of the force-deflection corridors characterising the rigidity of the impactor — as defined in Appendix 2 of this annex — may be allowed provided that:
34. When the flexible lower legform impactor is used for the test according to paragraph 1.4.3 of this Annex, the absolute value of the maximum bending moment of the tibia:
35. The impact direction is perpendicular to the anterior-posterior axis of the dummy and the axis of the impactor is aligned with the centre of the middle abdominal force transducer.
36. LCROSS uses the spent second stage of the Atlas rocket, the Centaur, as an SUV-sized kinetic impactor that will excavate a small crater on the floor of a permanently shadowed lunar crater.
37. Caspar Bone Tamp 8" cross-serrated end phenolic handle 40.1030 81/4" Caspar Bone Graft Holder and Impactor 40.1035 8" Screwdriver for Distraction Screws For pre-drilling holes for distraction screws
38. Brand Name: Bitingly Origin: CN(Origin) Features: Acrylic Clear Shockproof Case Compatible Brand: T-Mobile Compatible Brand: None Design: Plain Design: Transparent Features: 360 Full Shockproof Anti Impactor Type: Transparent acrylic Phone Back Cover Case …
39. Airborne Actinomycete spores, important contaminants in occupational and residential environments, were studied with respect to their (i) release into the air, (ii) aerodynamic and physical size while airborne, and (iii) survival after collection onto agar with an impactor
40. When tested in accordance with Annex 5, paragraph 1. (Flexible lower legform impactor), the absolute value of the maximum dynamic medial collateral ligament elongation at the knee shall not exceed 22 mm, and the maximum dynamic anterior cruciate ligament and posterior cruciate ligament elongation shall not exceed 13 mm.