1. 2 Test the sample according to the procedure in ASTM Standard Test Method D1230-61.

2. Brucella specific antibody response (Standard Agglutination Test, Complement Fixation, ELISA)

3. Standard Test Method for pH of Engine Coolants and Antirusts

4. 17 Check calibration of gloss meter with standard test block.

5. Standard Test Method for pH of Engine Coolants and Antirusts

6. Carrier module for adapting non-standard instrument cards to test systems

7. In addition standard samples are provided as reference during the test.

8. Electrostatics - Part 4 - 3 : standard test methods for specific applications - Footwear.

9. Standard addition means a procedure in which the test sample is divided in two (or more) test portions.

10. The most widely accepted standard for on-site wastewater treatment certification testing is the NSF/ANSI Standard 40 test.

11. This standard is applicable to the test for fluidity of cement mortar.

12. The slim profile Bladders passed pressure-tolerant with standard pneumatic pressure test

13. In mathematics, the Cauchy condensation test, named after Augustin-Louis Cauchy, is a standard convergence test for infinite series.

14. Biogram is an antimicrobial susceptibility test system for the determination of MICs from the standard disk diffusion test zone diameters

15. You will be asked to perform some standard manoeuvres during your driving test.

16. Standard test panels used as substrates for testing paints, adhesives, coatings and rust inhibitors

17. factor which takes into account the dilutions of the standard and the test sample

18. The ASTM test protocol " Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings"ASTM F 1642 (21) addresses this issue.

19. The Correlations use Standard Penetration Test (N) values corrected for overburden and hammer efficiency (N160)

20. Samples for the flexibility test shall be prepared in accordance with the ASTM D522 standard.

21. A reference standard cloth was compared with samples that had undergone an alkali solubility test.

22. Adjustable speed electrical power drive systems — Part 3: EMC product standard including specific test methods

23. This professional Brittleness Testing Equipment is designed and engineered in accordance with international test standards including: ASTM D746 (Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact), ASTM D2137 (Standard Test Methods for Rubber Property – Brittleness Point of Flexible Polymers and Coated Fabrics)

24. The method will be proposed as a standard test for epoxy adhesives used in thick joints.

25. Standard Test Method for pH of Engine Coolants and Antirusts Active Standard ASTM D1287 Developed by Subcommittee: D15.04 Book of Standards Volume: 15.05 Translated Standard: Russian more info ASTM D1287 Significance and Use

26. Stick the adhesion tape to the test board, put the adhesive tape in the hot temperature, lower end suspension standard loading, test the tape adhesion time.

27. ASTM D1287, 2011 Edition, October 1, 2011 - Standard Test Method for pH of Engine Coolants and Antirusts

28. Accessories include: shaft mounts, centre post adaptor, test ball, 3-jaw chuck, calibration set and calibration standard.

29. Standard 12-lead electrocardiography (ECG) is an easy and common test among the diagnostic Armamentariums of clinicians

30. = rms value of the weighted vibration acceleration measured at the seat attachment during a standard roadway test.

31. Standard test method for critical radiant flux of floor-covering systems using a radiant heat energy source.

32. The CF Cupellation furnaces are designed for the Cupellation, or fire assay test, of precious metals, which is a standard test method used to determine their purity.

33. on page 10, Standard ‘EN 568:2015, Mountaineering equipment — Ice anchors — Safety requirements and test methods’, fifth column:

34. 10 An unlikely standard-bearer for the Republican party, McCain will offer a stiff test for the Democratic nominee.

35. ASTM D4259, Standard Practice for Abrading Concrete ASTM D4260, Standard Practice for Liquid and Gelled Acid Etching of Concrete ASTM D4261, Standard Practice for Surface Cleaning Concrete Unit Masonry for Coating ASTM D7682, Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

36. 23 The standard method was used to test the colour of neutralized-bleached tallow, and the general method usually used by enterprise was to test the colour of direct bleached tallow.

37. The potency of an Antivenine under test is determined and expressed in terms of the relative potency to the standard Antivenines

38. The Arbitrary-or-capricious test is a legal standard of review used by judges to assess the actions of administrative agencies

39. 6 USG Fire-Resistant Assemblies Test Certification Test Conditions and Fire- and sound-tested Assemblies listed in this Selector are based on characteristics, properties and performance Certificationof materials and systems obtained under controlled test conditions as set forth in the appropriate ASTM Standard in effect at the time of test

40. Choose a SAM Broadcaster Cloud pricing plan or test ANY plan for only $5 for the first month, thereafter standard pricing applies

41. Each Aptitude test uses a standard method of administration and scoring so that results can be computed and compared with the other candidates.

42. In addition, that Directive, as amended by Commission Decision 2008/984/EC (4), now includes fluorescence polarization assay as a standard diagnostic test.

43. Besides the introduction of a classroom concept and new test images, the focus of the standard is aligned with the image display system.

44. (17) ASTM D1121-67, “Standard Method of Test for Reserve Alkalinity of Engine Antifreezes and Antirusts,” accepted June 12, 1967, into § 571.116

45. Shear bond strength was measured in accordance with the DIN 13990-2 standard governing test methods for the entire attachment–adhesive–enamel system.

46. Appointing a Biomethane Potential Test Laboratory for any proposed biogas plant feedstock is an important early step in an anaerobic digestion plant project.In this article, we discuss the Biomethane potential (BMP) test, which is a biological test to evaluate the potential methane/biogas volume generated from a feedstock.The biogas produced using the standard biogas test protocols is …

47. Standard Test Method for Detection and Estimation of Retention of Wood Preservatives by Aspergillus Bioassaying (Withdrawn 2010) 1.1 This test method covers a non-chemical, biological procedure for assaying wood for approximate preservative content (Note 0)

48. Belize is Open for Travel Travelers to Belize must test negative for COVID-19 and may be required to book approved Gold Standard Accommodations

49. Barraging Brawnhide (1) Standard Rainbow Barraging Brawnhide (2) Standard Rainbow Barraging Brawnhide (3) Standard Rainbow Demolition Crew (1) Standard

50. The test results of abrasive grain constitution showed that the standard sands and can assure high testing accuracy is capable to unify the testing result.

51. Durability test type: whole vehicle test/bench ageing test/none (1)

52. Results from an American Wood Preserver’s Association standard leaching test indicate that waterborne copper naphthenate treated samples retained 80 to 90% the copper initially absorbed.

53. Conventions The focus of this chapter is on Standard English Conventions, one of the two broad categories of questions on the SAT Writing and Language Test

54. ‘Standard reference test tyre’ (SRTT) means a tyre that is produced, controlled and stored in accordance with the ASTM (American Society for Testing and Materials) standards

55. Method Modified American NF-49 standard method with Serratia marcescens as the indicator bacteria was used to test the protective performance of the biosafety cabinets. Sentencedict.com

56. on page 11, Standard ‘EN 958:2017, Mountaineering equipment — Energy absorbing systems for use in klettersteig (via ferrata) climbing — Safety requirements and test methods’, fifth column:

57. Stream Binge for 14 days FREE and no lock-in contract Test out Binge's Basic, Standard or Premium plan and stream 10,000+ hours of shows and …

58. Abrasivenesses (CAI ¼ 0: 3 2 5: 6) were investigated using the CER CHAR Scratch Test and some additional ‘‘standard’’ hardrock testing procedures, such as testing

59. Alce™ Sample Test 2011 Test Booklet

60. The rating of the Arrester is defined as the rms voltage at which the Arrester passes the duty-cycle test as defined by the referenced standard.

61. Alternative dynamometer test (Alternative to track test)

62. Alternative dynamometer test (alternative to track test)

63. Ensuring mutual acceptance of test procedures and test results among the test houses;

64. The Biomarker can be a lab test, an imaging test or a clinical test

65. Test surface: This test is conducted on a road test surface affording good adhesion.

66. Clonus test - Upper motor neuron lesion test.

67. Test cross: All test crosses are Backcrosses

68. Function test device based on unit test case reuse and function test method therefor

69. ASTM D 1287 (Standard Test Method for pH of Engine Coolants and Antirusts) The pH of a coolant determines wether the coolant is alkaline, neutral or acidic

70. Each kind of boring method has the different effect on the original state of silty sand, so the standard penetration test value N obtained are certainly different.

71. Samples prepared according to # standard for application of # standard

72. 23 Autopilot integrative test system can accomplish the component test and the system combine test, which are stipulated in the test precis.

73. Tightness test ( opening and closing test, emergency opening and closing test ) for cargo hatch cover.

74. Autopilot integrative test system can accomplish the component test and the system combine test, which are stipulated in the test precis.

75. A related test is the Alp isoenzyme test.

76. ADMISSION TO ORAL TEST ° NATURE OF TEST ° MARKING

77. Cps test stands for Click-Per-Second test

78. Addition of test compound and preparation for test

79. Test probe and manufacturing method for test probe

80. & Standard font