1. Heat treatment of egg albumen

2. Heat treatment furnaces and furnace hearths

3. Heat treatment of age-hardenable aluminium alloys

4. Heat treatment of hardenable carbon steel pipes

5. Rapid heat treatment apparatus that enables extended pyrometer life

6. The Bolts are centerless ground and threaded after heat treatment

7. Heat treatment of age-hardenable aluminium alloys utilising secondary precipitation

8. Whole Stamping, heat treatment, blade special make, tartness and orderliness.

9. Flame treatment system equipped with exhaust gas and heat discharger.

10. Fibers of the polyterephthalamide of 4,4'-diaminodiphenic acid are strengthened and heat stabilized by a relaxed heat-treatment.

11. - mechanical materials: use of precipitation-hardenable steels, influence of heat treatment,

12. In addition, the heat treatment avoids the viability of the virus

13. In addition, the heat treatment avoids the viability of the virus.

14. An excess active sludge (S) discharged after a biological treatment is stored in a heat treatment tank (3).

15. Heat treatment and oil treatment of the surface densified wood additionally increased the contact angle of tested liquids.

16. After hard-facing the casting is hardened and tempered by heat treatment.

17. Blanching is usually considered a pre-heat treatment before drying, freezing, or …

18. The gas brazing and vacuum brazing and the influence of heat treatment.

19. Heat treatment for removal of bauschinger effect or to accelerate cement curing

20. Furnace roller and method for preheating combustion air for heat treatment furnaces

21. The active component was found susceptible to heat, and to acid treatment.

22. Enumeration: spread plate method using tryptone soya agar following a heat treatment.

23. Heat-treatment evidently decreased the water absorption of spruce and pine heartwood.

24. Note: the phrase alloys ‘capable of’ encompasses alloys before or after heat treatment.

25. The phrase maraging steel 'capable of' encompasses maraging steel before or after heat treatment.

26. Alloys not amenable to heat treatment, including low-carbon steel, are often work-hardened.

27. 13 Vaporization gas furnace, furnace section of dehydration, heat treatment furnace sales and installation.

28. The phrase maraging steel “capable of” encompasses maraging steel before or after heat treatment.

29. The methods involve heat treatment at relatively mild temperatures and pressures under acidic conditions.

30. Enumeration: spread plate method using tryptone soya agar with pre heat-treatment of feed samples

31. manufacture of milk-based products after heat treatment under the supervision of the competent authority

32. It can replace traditional isothermal anneal as advance heat treatment of roughcast of bearing rings.

33. 11 The influence of heat treatment on the crystallization behavior of polyoxymethylene (POM) was investigated.

34. Merr.) subjected to an appropriate heat treatment. (Urease activity maximum 0,4 mg N/g × min.).

35. Determination of activity of food enzymes as indicator of prescribed or desired heat treatment. 2.

36. Pressure chamber of a heat treatment furnace comprising a circulation ventilator and an outside drive

37. Enumeration: spread plate method using tryptone soya agar with pre heat-treatment of feed samples.

38. The blowpipe is useful for soldering, straightening, preheating before welding, heat forming or thermal treatment.

39. Vacu Braze is an industry leader for the heat treatment of medical implants and surgical components

40. The part preferably has a hardness after hardening by heat treatment of Hv 450 or more.

41. Post-treatment: Gases leaving the reactor are scrubbed to remove water, heat, acid and carbon dioxide

42. Temperature therapy device for treatment of anatomy including a thermal pad, fluidic pump, and heat exchanger

43. Conclusion Using the RF heat coagulation treatment to cure cervical erosion is both rapid and effective.

44. The disclosure provides embodiments where a spirit is sequentially processed through heat and actinic light treatment.

45. The present invention relates to a carbon treatment system for supplying decomposition heat to waste tires.

46. Each label (1) comprises a medium (2) that can be modified by laser radiation or heat treatment.

47. Method for the heat treatment of castings using an air quench and system for implementing the method

48. Reduction of molecular size by appropriate treatment with water and either heat/pressure, enzymes or acid/alkali

49. Installations for heating water, water storage tanks and heat accumulators, water treatment plants, installations for water purification

50. Apparatus for the treatment of neuropsychic and somatic diseases with heat, light,[Sentencedict.com] sound and vhf electromagnetic radiation.

51. Moist heat (autoclaving and blanching) was the most effective treatment in reducing the mAb 4C10 detectable Amandin immunoreactivity

52. On the treatment of the latent heat of solidification, the temperature compensation method and enthalpy method are used.

53. The alloy forms two precipitation phases during heat treatment and age hardening: a beta phase of Mg¿2?

54. Thereafter, denatured impurities, residual solvent and aggregate generated by the heat treatment are removed from the gamma globulin.

55. Product obtained in amorphous form by heat treatment and grinding, containing aluminium and calcium phosphates as essential ingredients

56. Annealing is a heat treatment process used mostly to increase the ductility and reduce the hardness of a material

57. Case hardening is a heat-treatment process that is used to prevent rotating components from becoming brittle and failing

58. Heating, melting and heat treatment furnaces, in particular gas-operated and burner-operated of all kinds, and components thereof

59. The additional heat treatment stabilizes the polymeric properties of the tennis string for better control and higher tension maintenance.

60. In order to understand what Annealing, normalizing and stress relieving is, we first need to understand what heat treatment is

61. Annealings; Our partner Plasmait GmbH is a supplier of plasma based heat and surface treatment solutions to the metals industry

62. Maize seedlings respond to heat shock, water stress, abscisic acid treatment, and wounding with the synthesis of stress-specific proteins.

63. Annealing is a heat treatment process which alters the microstructure of a material to change its mechanical or electrical properties

64. Heat regenerators, heat accumulators, heat pumps, heat exchangers, in particular plate heat exchangers, counterflow exchangers, countercurrent exchangers

65. Subjected to heat treatment cycles to facilitate the martensitic transformation process (solution annealed stage) and subsequently age hardened (precipitation hardened stage).

66. The homogenization is an important heat treatment step during wrought aluminium alloy production, it influences greatly the quality of the products.

67. Allotropy is a very important property for materials; these allotropic changes are the basis for heat treatment of many engineering materials

68. Treatment of metals, casting, welding, machining, on-site machining, heat treatment, metal spraying, thermo spraying, electroplating, boring, threading, milling, grinding, drilling, tapping, dowling, peening, aligning, screw cutting, sleeving, turning, facing and polishing

69. The scientists found that UV treatment at room temperature can significantly reduce the heat subsequently required to pasteurize liquid egg whites.

70. The treatment determination of the GU based on carbuncle which clearing away heat and removing toxin, resoluting carbuncle and promoting tissue.

71. However, an appropriate heat treatment process after casting or alloying can reduce the negative effects that might occur due to Coring.

72. A resistor heats each diode, which acts as a heat sink, so that the treatment area of the skin and the adjacent subcutaneous structure of the mammal receive light and thermal treatment simultaneously.

73. The exposure of cultured Chinese hamster cells (CHO) to Anisotonic medium increased the cellular sensitivity to heat treatment at 42.3°C

74. Enumeration: spread plate method using tryptone soya agar with pre-heat treatment of feed samples and identification: pulsed field gel electrophoresis (PFGE)

75. Heat regenerating systems with heat accumulators, and with heat exchangers

76. Roasting, melting and heat treatment ovens, industrial process ovens, in particular gas and burner-supported ovens of all kinds, and components therefor

77. Heat exchangers, heat exchanger systems, heat pumps, heat accumulators and parts for the aforesaid goods

78. Pit-type furnaces with air circulation offer the advantage of easy charging, for heat treatment of heavy parts or loads in charge baskets.

79. A shrinkable copolyester film having shrinkage of not less than 30 % in either the machine direction or transverse direction after specific heat treatment.

80. In heat treatment plants we use e.g. scissor lift tables or lifting bar charging machines for loading annealing furnaces – with coils or billets.