Đặt câu với từ "change-speed gear"

1. by degradation or change in: e.g. engine, gear, brake, suspension, active steering, speed limitation devices;

2. — ►M5 by degradation or change in: e.g. engine, gear, brake, suspension, active steering, speed limitation devices ◄

3. When the navigator unbinds a cluth, the driving gear of engine will link up with speed change gear up, make the dynamic force spread to wheel thus up.

4. Move this lever to change gear.

5. 30 When the navigator unbinds a cluth, the driving gear of engine will link up with speed change gear up, make the dynamic force spread to wheel thus up.

6. A roller gear, especially a toroidal gear, with an infinitely variable speed increase ratio.

7. She made a smooth gear change.

8. The gear change is slick and rapid.

9. The transmission further comprises: gear change linkages (50, 50') connected between the driving pulley and the driven pulley for adjusting a gear ratio by axially translating each of the conical wheels constituting the driving pulley and the driven pulley; and a gear change actuator (60) connected to the gear change linkages (50, 50') for receiving a gear change input from the outside and actuating the gear change linkages (50, 50').

10. A gear shift light shows optically the optimal timing for gear shifting based on a preadjusted engine speed.

11. You should change gear the engine's starting to labour.

12. A change of speed, like a whirlwind.

13. He told us when to indicate and when to change gear.

14. You can change into a higher gear now you're going faster.

15. A type of miter gear where one gear (sometimes called a pinion) is smaller than the other, Bevel gears provide right-angle speed reduction at speed ratios ranging from 2: 1 to 5:1

16. A retractable wheel landing gear is optional and adds five kts to cruising speed.

17. Transmission components for land vehicles of all kinds, in particular gears, motors, gear motors, and gear motors with electric and mechanical adjustable speed mechanismms

18. You'll need to change into a lower gear when going up this hill.

19. Good average speed requires a gentle, smooth and regular driving style avoiding any unnecessary change of speed.

20. The GIpro reads the Gear Position Sensor directly, while other units, such as Acumen DG8 and Datatool DiGi compute gear position from engine and wheel speed.

21. Accelerated speed of operation is attained upon the return stroke as a function of gear sizing.

22. The speed limitation function shall permit a normal use of the accelerator control for gear selection

23. Hint: Shift the gear when the speed-o-meter arrow enters the Green or Blue Zone.

24. 28 As ever: the gear change and clutch are heavy; the throttle response terrific.

25. Differential Calculus is based on rates of change (slopes and speed)

26. A shock absorber (73) is provided to prevent abrupt speed change.

27. In other words, throttle Blipping is clutch in, blip the throttle, lower the gear and clutch out to match (approx.) the engine speed with the lower gear.

28. You have to come down that hill in a low gear to keep within the speed limit.

29. Employing drive signal pulses can impart further optical power change speed improvements.

30. The test may then include a gear change to a lower range and a higher acceleration.

31. Toyoda roving frame; toyoda flyer frame; toyoda simplex frame; toyoda fl16; toyoda gear; toyoda spinning machine; toyoda roving machine; speed frame spare parts; gear on flyer; Bobbiner; Related products

32. For manual transmissions, the operator must release the accelerator pedal during each gear change and complete the change in the minimum amount of time.

33. Transmission components for machines and vehicles of all kinds (other than for land vehicles), in particular gears, motors, gear motors, and gear motors with electric and mechanical adjustable speed mechanismms

34. This effect is achieved by using a gear acuated device, rotating with twice the crankshaft speed, which sets the highest precision requirements in their manufacture and accuracy of the gear.

35. Also, there was a tendency for oscillation whenever there was a speed change.

36. Can change the background color , foreground color, fonts, set up a rolling speed.

37. (British English) to start using a higher gear when driving a car, etc. Change up into fifth

38. But stressed constantly the approach speed use factor the enhancement caused the approach speed to surpass the controllable scope, brought the disadvantageous influence to the taking off speed change.

39. We have to change laws, eliminate unnecessary procedures, speed up processes and adopt technology.

40. Change up definition: When you Change up , you move the gear lever in the vehicle you are driving in order to Meaning, pronunciation, translations and examples

41. Atom Skates provides industry-leading roller derby and inline speed skating boots, frames, plates, wheels, protective gear and complete skate packages.

42. Speed of change - One of the choices to be made is between evolution and revolution.

43. These Catalysts speed up chemical reactions but do not change their structure in the process

44. Acceleration is the change in speed or velocity of an object over a certain time

45. Gear Cards ~ Cogwheel Cards ~ Gear Note Cards ~ Gear Stationery ~ Embossed Gear Notes ~ Note Cards ~ Gears ~ Cogwheel ~ Thank You MyCellarCreations

46. Generally speaking for a properly adjusted Boat, this is the speed when a Boat is put into gear without advancing the throttle

47. Flossie is the ultimate precision rider and will perform the same gear change or the same acceleration time after time.

48. It is particularly challenging as the climb immediately follows a sharp curve, causing an abrupt change in gear and cadence.

49. Therefore , it is recommended to adopt the two - step change - speed propeller in the tug design.

50. AC gear motors, DC gear motors, brushless gear motors, stepping motors, linear actuators, integrated motor drives, motor generators, motor speed controls, servo drives, stepping drives, electric circuits for the control and regulation of electric motors, electric controls for electric motors, amplifiers for electric motors, position controls for electric motors, stepping controls for electric motors, electric motor position sensors, electric motor speed sensors, electric motor current sensors

51. It is not possible to display the change of the shutter speed or the change of the depth of field through the adjusted aperture value.

52. The results showed that the highest relative speed is affected mainly by eccentricity and radius of eccentric gear, and led to the agglutination.

53. Check ring gear and pinion gear teeth contact pattern.

54. Welcome to Civilized Galactic Gear Welcome to Civilized Galactic Gear Welcome to Civilized Galactic Gear

55. Now you can change the actual position and speed by changing the values in the edit boxes.

56. The rotation speed and direction of the motor (6) can be adjusted to change the massage mode.

57. Backpackers.com shares in-depth outdoor gear reviews, recommendations, and guides for backpacking gear, camping gear, and hiking gear with a dash of humor.

58. The invention is based upon a method for adjusting a speed of a shaft in a gear selector box (10) on a motor vehicle.

59. Bushranger® 4x4 Gear NEW Recovery Gear Range has arrived

60. Worn teeth on ring gear or drive pinion gear.

61. As with ABS plastic roller roller gear and gear.

62. 3 synonyms for Cogwheel: gear, gear wheel, geared wheel

63. The arrangement allows to accommodate different gear ratios between the ring gear (10) and input gear.

64. In a two-stroke engine, the Camshaft rotates at the same speed as the crankshaft, while in a four-stroke engine, the Camshaft spins at half the speed of the crankshaft since the Camshaft gear has

65. A Continuously variable transmission (CVT) is an automatic transmission that can change seamlessly through a continuous range of gear ratios.This contrasts with other transmissions that provide a limited number of gear ratios in fixed steps

66. Idealized Bhikku Cyclas in Gear Set; Samsara in Gear Set; Idealized Bhikku Knotcap in Gear Set; Idealized Bhikku Gloves in Gear Set; Idealized Bhikku Poleyns in Gear Set; Idealized Bhikku Boots in Gear Set; Armor Set/iLevel 400-499

67. Bruce went into a low gear and drove at a terrifying speed, keeping the front wheels astride the crack as he followed its zigzag course.

68. SIZE CHECK Select a gear Coupling to connect a 500 HP, 1170 RPM electric motor to a drive high speed shaft of a maneuvering winch

69. Tests in acceleration shall be carried out and the acceptance criteria verified for each gear ratio allowing in theory the set speed to be exceeded.

70. Crank-gear

71. The constant speed test shall be carried out with the same gear(s) specified for the acceleration test and a constant speed of 50 km/h with a tolerance of ±1 km/h between AA' and BB'.

72. The Changan speed: gear shift from “4” to “5” - we sold more than 50,000 units this year ——— UNI Glory Night ——— Changan Automobile won the honor …

73. Tests in acceleration shall be carried out and the acceptance criteria verified for each gear ratio allowing in theory the set speed to be exceeded

74. Gear lever knobs

75. In case of non-locked transmission conditions, the test may include a gear ratio change to a lower range and a higher acceleration.

76. Blipping the throttle means to roll on quickly and for just an instant to get the engine speed to match the lower gear you're shifting into

77. Exhaust gas opacity to be measured during free acceleration (no load from idle up to cut-off speed) with gear lever in neutral and clutch engaged.

78. Exhaust gas opacity to be measured during free acceleration (no load from idle up to cut-off speed) with gear lever in neutral and clutch engaged

79. Adapt definition: make fit for, or change to suit a new purpose synonyms: tailor, naturalise, anglicize, anglicise, vary, alter, fit, naturalize, transcribe, gear

80. The Agma/EP Gear Oil series of lubricants are special formula gear lubricants for heavy duty industrial gear sets as specified by the Agma (American Gear Manufacturers Association)