1. Direct surface heating/cooling installation

2. Cooler structure for surface cooling

3. A cooling passage may be formed on the other surface of the cooling plate.

4. This cooling system leads to the surface, right?

5. In such a case the derived equation can still serve as a measure for the deviation of the actual from the minimum cooling surface.

6. Layout of power semiconductor contacts on a cooling surface

7. Determination of a surface temperature of a cooling body

8. The wind is associated with surface cooling of the slope.

9. Method and tunnel for the surface cooling of food products

10. A cooling material using particles arranged for generation of surface plasmon resonances

11. Yeah, because I know actual cool, not just surface cool.

12. soil and surface water for products used in large open recirculating cooling systems.

13. However, a study comparing IVTM with surface cooling found no differences in clinical outcome.

14. Wet deck surface, fill and fill sheets especially designed for use in cooling towers

15. (84) EN 1264-4:2009 ‘Water based surface embedded heating and cooling systems — Part 4: Installation’.

16. (96) EN 1264-4:2009 ‘Water based surface embedded heating and cooling systems — Part 4: Installation’.

17. (82) EN 1264-3:2009 ‘Water based surface embedded heating and cooling systems — Part 3: Dimensioning’.

18. The cooling flow moves across the surface and absorbs` heat from the product tray by convection.

19. While it is thus bifacial , in actual practice only one surface is beaten .

20. This prediction requires an a priori chosen surface normal velocity of the active transducer surface, which often does not coincide with the actual surface normal velocity.

21. At least one of the airfoil and the platform includes a cooling passage defined by a surface.

22. 21 The interior cooling recorded by contraction at the surface must have persisted over a long period.

23. The external surface of the cavity is subject to actual and/or imposed loads.

24. An apparatus for cooling a skin surface includes a support structure coupled to an electromagnetic energy delivery device.

25. A heat-removal device for removing heat from a hot surface includes a housing containing a cooling fluid.

26. Cooling apparatus and cooling installations for air, except cooling towers

27. The surface temperatures of the North Sea are essentially influenced by the actual weather conditions.

28. Infrared cooling of the surface is also inhibited, but heat radiation is less affected by dust than visible light.

29. Each cooling circuit channels cooling fluid through at least one cooling chamber to facilitate cooling the airfoil.

30. The Asphere measurement is the difference between the design Asphere surface and the actual surface-the same result expected from standard laser Fizeau interferometry

31. An absorptive article is provided, between the front surface sheet and the rear surface sheet thereof, with a material for imparting a cooling sensation, which contains an algefacient.

32. - AIR COOLING ( CENTRAL/LOCAL COOLING INSTALLATIONS ) ,

33. As new problems with the emergency cooling systems of nuclear power plants continue to surface, there are many fearful tweets:

34. Graham Condensers The Graham condenser has a large cooling surface area by allowing coolant to circulate around the inner coil

35. Cooling system for an aircraft, aircrft comprising the cooling system and cooling method

36. The air cooling system may include an absorption cooling system or a thermoelectric cooling system.

37. Cooling towers are an integral component of many Cooling systems that provide comfort or process Cooling

38. Cooling air supply for the cooling of different systems requiring cooling air in an aircraft

39. Ventilator for cooling, warming or fresh air cooling

40. Adsorption cooling system and adsorption cooling method for an aircraft

41. Cooling appliances and installations, namely, beverage cooling apparatus, evaporative air coolers

42. Mirrors cooled either by 'active cooling' or by heat pipe cooling;

43. Mirrors cooled either by ‧active cooling‧ or by heat pipe cooling;

44. A cooling system includes a facility cooling unit, a cooling tower, and one or more thermal capacitor units.

45. Target, adapted to an indirect cooling device, having a cooling plate

46. Mirrors cooled either by ‘active cooling’ or by heat pipe cooling;

47. Auxiliary cooling device for connection to an aircraft liquid cooling system

48. Method for operating an aircraft cooling system, and aircraft cooling system

49. Air cooling at a velocity and air flow direction simulating actual conditions may be used during the heating runs, the speed of the air flow being

50. Paragraph # (a) prescribes the pre-cooling temperatures for the calorimeter box or transport equipment before the start of the actual capacity tests of the refrigerating unit

51. Aircraft cooling duct

52. Cooling & Winter LLC, Attorneys at Law, Joseph Cooling Attorney GA

53. Aircraft/spacecraft fluid cooling system and aircraft/spacecraft fluid cooling device

54. 1. mirrors cooled either by “active cooling” or by heat pipe cooling;

55. Cooling tower controllers

56. Air Cooling uses the case’s air as the primary Cooling medium

57. Mirrors cooled either by “active cooling” or by heat pipe cooling;

58. 1. Mirrors cooled either by ‘active cooling’ or by heat pipe cooling;

59. Industrial chemicals for use in treating cooling water in recirculating cooling systems

60. 1. mirrors cooled either by "active cooling" or by heat pipe cooling;

61. Dynamic Smart Cooling (DSC) was an earlier HP solution for smart Cooling

62. Cooling fans and cooling modules, being parts of vehicle air conditioning systems

63. Air cooling apparatus

64. Beverage cooling apparatus

65. Paragraph 56(a) prescribes the pre-cooling temperatures for the calorimeter box or transport equipment before the start of the actual capacity tests of the refrigerating unit.

66. The deck's cooling.

67. 1. Mirrors cooled either by 'active cooling' or by heat pipe cooling;

68. 1. mirrors cooled either by ’active cooling’ or by heat pipe cooling;

69. The cooling tube is adapted to direct cooling air through the flow path.

70. The actual Camber angle is the measure (in degrees) of the difference between the wheels’ vertical alignment perpendicular to the surface

71. 1. Mirrors cooled either by "active cooling" or by heat pipe cooling;

72. Ratio between the cooling capacity and electricity input in a cooling/refrigeration system.

73. What is Adiabatic cooling? Adiabatic cooling systems function similarly to dry cooling systems, but with the incorporation of pre-cooling pads; running water over pre-cooling pads and drawing air through the pads depresses the ambient dry bulb of the incoming air

74. Liquid absorbing cooling pad

75. General anneal cooling rate slowest, fire rate quicker, the quenching cooling rate is quicker.

76. Depending on the actual conditions in service different surface properties are required, e.g. roughness, coefficient of friction or the absence of porosity.

77. Having confirmed plume fallout, the team now wanted to search for actual physical evidence of plume particle accumulation on the surface itself.

78. As cooling continued, subduction and dissolving in ocean water removed most CO2 from the atmosphere but levels oscillated wildly as new surface and mantle cycles appeared.

79. Apparatus for cooling beverage

80. The printhead assembly may include a cooling channel configured to receive a cooling air flow.