Đặt câu với từ "tolerances"
1. Tolerances: Tolerances are provided to allow for human error during the grading and packing process.
2. Circuit and method for adjusting circuit tolerances
3. It has tremendous tolerances for terrain and climate.
4. Taking into account mechanical tolerances the target area shall:
5. Ambient light values shall be measured within the following tolerances:
6. Course Name (Evaluating geometrical tolerances for assembly ) Code 012T Description
7. Tolerances on Bandsawed parts What is the accepted tolerances on dimensions and squareness, on material cut by the supplier? Vladimir 11-15-2009, 05:42 PM #2
8. Grading curve of the aggregate in the asphaltic mix, with tolerances
9. Grading curve of the aggregate in the asphaltic mix with tolerances
10. Maximum permitted tolerances for abundance ratios for selected mass fragments:
11. Our Achromats have precise specifications and tolerances for uncompromising image quality
12. Ac input supply is within required tolerances and supplies the UPS.
13. The values quoted are absolute limit values including any measurement tolerances.
14. Grading curve of the aggregate in the stone mix, with tolerances.
15. Course Name (Dimensional and Geometrical Tolerances ) Code 241-4H6-RI Description
16. Figure 2 Grading curve of the aggregate in the asphaltic mix, with tolerances
17. Figure 2: Grading curve of the aggregate in the asphaltic mix with tolerances
18. · Add the following provision to all classes in the section on quality tolerances:
19. • Welded axle tubes with tight tolerances so chain adjustment is never needed.
20. Tolerances are held uniformly from the mounting to the working Collet taper
21. Device for adjusting tolerances when fastening an add-on to a base
22. We pride ourselves on designing and manufacturing Broaches for difficult jobs with tight tolerances
23. Concentricity tolerances have a feature math type when the considered feature has surface data
24. The machines that manufacture Lego bricks have tolerances as small as 10 micrometres.
25. Timken ® engineered Bearings feature precision tolerances, proprietary internal geometries and quality materials
26. Additional control of amplitude is used to correct manufacturing tolerances and temperature sensitivity.
27. Figure 2 : Grading curve of the aggregate in the asphaltic mix with tolerances.
28. For all phases of acceleration, constant velocity and deceleration, standard NEDC tolerances shall be applied;
29. Crimson Trace Lasergrips and Laserguards are precision-engineered and expertly manufactured to exacting tolerances
30. For cross wire welds inside the lamps, tight tolerances during wire penetration are requested.
31. DILLIMAX TL plates are plates with higher requirements for both dimensions and flatness tolerances.
32. Easy to machine, Acetal makes an outstanding choice for applications that require complex, tight tolerances.
33. Tolerances of angles for the lower legform impactor at the time of first impact
34. Thus it offers the best prerequisites for the optimal adjustment of superior tolerances and technical properties.
35. On a Blueprinted motor one could say there “are no tolerances”, since everything is matched at …
36. Modern Cannon are complex mechanisms cast from high-grade steel and machined to exacting tolerances
37. The seal for the vent outlet may be manually adjustable to compensate for manufacturing tolerances.
38. For all phases of acceleration, constant velocity and deceleration, standard NEDC tolerances shall be applied.
39. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph #.#.#. below
40. I¿) and the allocated recesses are mechanically produced to fit accurately and to have exacting tolerances.
41. Derogation from specifications for admitted tolerances for alcohol content laid down in Article #: Royal Decree #/# [cf
42. b. for the adjustment, to required tolerances, of the longitudinal magnetic field of free electron 'lasers`.
43. Annealed seamless stainless steel tubing is suitable for applications demanding higher strengths and tighter tolerances
44. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2. below):
45. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2 below);
46. 1 [With specific provisions related to moisture content, size and tolerances, and the absence of skin.]
47. Over # km/h, it is accepted to go beyond tolerances provided the accelerator pedal is fully depressed
48. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph #.#.# below
49. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2);
50. The actual torso angle corresponds theoretically to the design torso angle (for tolerances, see paragraph #.#.# below
51. Requirements on joining of the components (axle shaft, wheels, bearings, axle boxes, traction components...), tolerances, impedance between wheels.
52. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2 below).
53. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2. below);
54. Fruits split where the stem is joined to the fruit are allowed only in connection with quality tolerances.
55. An impedance matching circuit may be used to adjust for manufacturing and design tolerances in a surgical instrument.
56. Quality tolerances: maximum acceptable Percentage (in weight or number) of products not meeting the requirements of the class.
57. It makes no promise about manufacturing tolerances or for what size of foot the shoe is actually suitable.
58. The actual torso angle corresponds theoretically to the design torso angle (for tolerances, see paragraph 3.2.2 below).
59. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2 below):
60. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see item 3.2.2 below);
61. For example, the technological capabilities of current combat aircraft will continue to challenge human physiological tolerances of acceleration forces.
62. Cermet inserts can excel at holding the precise tolerances and finishes that often characterize the work on these machines
63. Cucurbits as a group have very limited tolerances to most herbicides. Accurately calibrate all equipment before herbicide application
64. (c) sampling plans and the methods and analytical tolerances to be applied to check compliance with the criteria;
65. Over 50 km/h, it is accepted to go beyond tolerances provided the accelerator pedal is fully depressed.
66. : angle of vehicle asymmetry due to construction tolerances, to suspension adjustment and to uneven load distributions (in degrees)
67. Individual Broaches, Bushings, and Shims fabricated to precision tolerances in a wide range of inch and metric sizes
68. Craftwork Brochure Product specifications are based on averages derived from the manufacturing processes and may vary within normal industry tolerances
69. The evolution of climatic tolerances in Anogra + Kleinia has been heterogeneous, across phylogenetic groups and across different dimensions of climate
70. Pure genius is what the Alecto is! Developed using very precise tolerances normally reserved for top end Match Air Pistols
71. The values shall be adjusted taking into account the movement of the pantograph and track tolerances according to Annex E.
72. The actual cutting is accomplished by intermeshing, rotating blades built to tolerances of up to one millionth of an inch.
73. Convergent Product specifications are based on averages derived from the manufacturing processes and may vary within normal industry tolerances
74. We custom form your Ampoules to precision tolerances using a variety of glass sizes using innovative and proprietary glass forming machinery
75. This standard states surface colours and related colour tolerances for traffic signs and for the marking of road and airport pavements.
76. Built to tolerances achievable in the 19th century, the success of the finished engine indicated that Babbage's machine would have worked.
77. Craftwork Brochure Product specifications are based on averages derived from the manufacturing processes and may vary within normal industry tolerances
78. The evolution of climatic tolerances in Anogra + Kleinia has been heterogeneous, across phylogenetic groups and across different dimensions of climate
79. At the same time, the control element is comparatively robust with respect to manufacturing tolerances, acceleration forces, vibrations, and temperature loads.
80. We machine our Beryllium to tolerances up to 1/100,000 of an inch (0.000001 in.) to meet the most demanding mission requirements.