1. (4) Bending and tensile strength

2. Stress, strain, bending, compression, shear, torsion, tension, hoop stress, fatigue;

3. Bending strength was also favourably affected.

4. Adequate correlation exists between bending MOE and bending strength with moisture content.

5. The bending strength of glulam depends on both board strength and finger joint strength.

6. Possible qualitative changes were observed by determining bending strength and crushing strength.

7. Bending tests reveal the elastic modulus of Bending, flexural stress, and flexural strain of a material

8. Device for measuring the bending strength of flat consignments

9. Key words: box girder, ship's hull, bending, ultimate strength, residual strength, residual stresses, initial imperfections.

10. SiC products thus have the highest cold-crushing strength, hot-bending strength and thermal conductivity.

11. Bending line This brochure deals with Bending of high strength steel for the trademarks Strenx, Hardox and Docol

12. Alternative characterisations include moduli of elasticity and rupture, and bending strength.

13. The windowsills possess remarkable bending STRENGTH and high coefficient of elasticity.

14. 3¿ or more and a bending strength of 300 kg/cm?

15. Aluminum alloy extrudate with excellent bending crushing strength and corrosion resistance

16. B = e2 óF where óF is the bending strength at break;

17. Furthermore, factors such as stiffness or shear and torsional strength may be more important than bending strength.

18. Bending high strength steel sheet and plate rarely proves to be difficult,

19. The splice is optimised for uniform bending stiffness and maximum strength retention.

20. During Abrasion, a series of repeated applications of stress takes place

21. These same corrugations, however, result in a decrease in longitudinal bending strength.

22. Macro-, micro-, and total porosity and bending strength (ISO 5833) were determined.

23. Bending strength, internal bond and hardness of all polystyrene treated particleboards were improved.

24. Composite producted from wood of higher density are characterized by higher bending strength.

25. The magnesium alloy plate has satisfactory strength in combination with excellent bending workability.

26. This is demonstrated in the introduction by means of a bending strength test.

27. 3. The bending strength and stiffness were determined according to ASTM D4761-05.

28. Aluminum strip for lithographic printing plate supports having a high reversed bending strength

29. All cement specimens that we tested fulfilled the ISO requirements for bending strength.

30. The columnar bodies have a greater bending strength than that of the guide rails.

31. The threshold for optimising bending strength and weight is simply at a different level.

32. In our language, the word " will " denotes strength, willpower, bending someone to your will.

33. The bending modulus of elasticity and flexural strength are very important in this connection.

34. The compressive surface stress is tough in the glass because any bending load has to overcome quenched compressive stress before there's a net tensile stress on the surface.

35. The classical Westergaard type stress function analysis for in-plane stress crack problems is adapted to classical bending of cracked plates for determination of mode-1 stress intensity factors.

36. with regard to the impact strength and the bending coefficient, see Appendix A.#, marginals # to

37. Points 4.5.1. (Strength test), 4.5.2. (Resistance to buckling) and 4.5.3. (Resistance to bending moment) only.

38. A composite member (10) features a unique ply geometry which contributes to improved bending strength.

39. Rape seedlings were acclimated to evaporative dehydration by exposure to repeated moderate water-deficit stress.

40. • Develop methods and devices to better predict the ultimate strength of tension, bending, shear and compression.

41. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending

42. Key words: Ground improvement, undrained shear strength, consolidation, stress path, settlement.

43. The poplar boards showed the highest bending strength, followed by those made from spruce and birch.

44. The board has markedly improved bending strength and resistance to pulling out of screws and nails.

45. Tensile strength and flexibility have been assessed with the aid of a four point bending configuration.

46. The percentage absorption of oil is also depending on the bending strength of the original sheet.

47. Static bending properties and tensile strength increased as fiber L/D increased from 3 to 26.

48. Calculation of reactions, courses of forces, moments, stress, deflection and bending angle of the shaft and others.

49. Key words: bone mineral content, muscle strength, unilateral loading, mechanical stress, absorptiometry

50. In addition to the adhesive test, bending strength, hardness, and colour of the modified timbers were examined.

51. A structural member of automobile exhibiting excellent bending strength and energy absorption characteristics while reducing the weight.

52. Flakeboards were tested for internal bond strength, thickness swell, modulus of elasticity, modulus of rupture, and breaking strength in bending, after two severe accelerated aging tests.

53. Smaller chips, such as the size of 0402, reached in all types of ceramics larger bending strength values.

54. Only bending strength has been higher as compared to spruce and fir; however, the individual values scatter considerably.

55. The influence of the drying treatments on the maximum strength in bending of both wood species was stronger.

56. Consideration is given to strength phenomena of commercial timber alone and in reinforced sections in bending and shear.

57. The partition (15) compensates for a reduction in the bending and torsion strength of the valve shaft (12).

58. Key words: timber, strength, size effects, length effect, weakest link theory, design method, load configuration, bending, compression, tension.

59. Burnout is a state of emotional, mental, and often physical exhaustion brought on by prolonged or repeated stress

60. Deflection Bending Stress, EJMA ”S6”, is stress resulting from deformation of the sidewalls of the convolutions caused by the movement of the bellows as it compresses, extends, or Angulates

61. Curvature and bending stress amplitude of double helix in langs of wire rope are much larger than in ordinary lay.

62. Low alloy steel with a high yield strength and high sulphide stress cracking resistance

63. Yield strength is the lowest stress that produces a permanent deformation in a material.

64. Just like torsion, in pure Bending there is an axis within the material where the stress and strain are zero

65. It was found that machine stiffness has no significant effect on the compressive strength, the flexural strength, or the critical stress intensity factor.

66. Bending tool assembly for determining the bending angle

67. 6 Strength of the school box with ABAQUS finite element analysis,(www.Sentencedict.com) and electric stress test method.

68. Key words: columns, confinement, ductility, high-strength concretes, lightweight aggregate concretes, reinforcement, stress–strain relationships, tests, ties, toughness.

69. The wood samples treated with gases were also tested in bending stress. Wood absorbs ammonia very quickly, but the gas is only slightly bound.

70. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus

71. Super Cropping is a high-stress training technique that involves pinching and bending branches to damage the inner fibers while leaving the outer lining intact

72. Description: Schott AS 87 eco is an ultra-thin Aluminosilicate glass with extremely high levels of bending and impact strength and superior scratch resistance

73. The Bending Iron maintains an even, thermostat-controlled heat for Bending wood

74. Bending results from a couple, or a Bending moment M, that is applied

75. My Bentwood rings use the process of steam bending wood, wrapping around the circumference of the ring utilizing the full strength of the wood's grain

76. Testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture;

77. We're bending the curve.

78. Testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture

79. The inferior surfaces of the carpals and tarsals, are fractured in the same way, indicative of a repeated stress injury over a short period of time.

80. (a) Testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture;