1. The heat absorption heat exchanger (64) is coupled to the liquid outlet of the separator to receive refrigerant.

2. Recovered waste heat can be used to provide the thermal compression of the refrigerant.

3. Refrigerating systems and heat pumps — Safety and environmental requirements — Positive displacement refrigerant compressors

4. High-capacity heat exchanger for motor vehicles, and heater/air conditioner comprising a high-capacity heat exchanger

5. No refrigerant in the refrigerant system.

6. Soil moisture assessment by heat capacity

7. The refrigerant carries the heat to the outside coil where the fan cools it, blowing the heat into the outside air.

8. The indoor unit cools or heats a space, and includes a first heat exchanger that performs heat exchange between air and refrigerant.

9. One of the key properties of an encapsulated thermal battery is its volumetric heat capacity (VHC), also termed volume-specific heat capacity.

10. The first heat exchanger (16) is provided for heating up the air stream and cooling down the refrigerant.

11. After being used to liquefy the natural gas, the low-level refrigerant is (a) warmed by heat exchange (65) in countercurrent relationship with another stream of the low-level refrigerant and by heat exchange (65) against a first stream of the high-level refrigerant, (b) compressed to an elevated pressure, and (c) aftercooled against an external cooling fluid.

12. The high-level refrigerant is warmed by the heat exchange with the low-level refrigerant, compressed (67) to an elevated pressure, and aftercooled against an external cooling fluid (69).

13. Heat absorbed from the body vaporizes the refrigerant, which expands to cooler remote regions of the bladder.

14. The standard heat capacity, entropy, sublimation enthalpy of graphite.

15. 18 Heat capacity and heat of vaporization of components of litsea cubeba oil were calculated.

16. In some engineering contexts, the volumetric heat capacity is used.

17. Space element for improving the heat accumulation capacity of spaces

18. Pressurizing the refrigerant is what manipulates the system to collect heat from the appropriate area, depending on the season.

19. Refrigerant injection above critical point in a transcritical refrigerant system

20. Refrigerant evaporators, with and without cold accumulators, refrigerant expansion valves

21. A Calorimeter is a device designed to measure heat of reaction or physical changes and heat capacity

22. The transparent heat conductive layer is smaller in thermal capacity and absorption of radiant heat than the base.

23. Hermetic refrigerant compressor

24. The cooling member comprises: a heat radiation fin which adjoins the external side of the battery cells; and a refrigerant pipe which is positioned under the heat radiation fin.

25. An air conditioning system using a fluid refrigerant that includes a cooling unit including a housing, a heat exchanger, and a blower.

26. The heat is expelled from the building, and the refrigerant circulates again through the evaporator coils to continue the cooling process.

27. Further introducing enhanced convective heat transfer structure and setting the fins according to the aerodynamics improve the heat dissipating capacity.

28. Air refrigerant type cooling apparatus and air refrigerant cold system using the same

29. Airconditioner using inflammable refrigerant

30. A gas compressor is used to heat the gas CO2 refrigerant to around 100°C under pressure of 10MPa via adiabatic compression.

31. It is Combusted in a calorimeter whose heat capacity is 76.01 kJ/C

32. Mixed refrigerant cryogenic vapor compression cycle

33. Refrigerant filling installations (machines)

34. An absorption cycle refrigerant system includes an absorber having a solution of refrigerant and absorbent, and an absorbent loop and a refrigerant loop communicating with the absorber and respectively carrying absorbent and refrigerant.

35. Water’s potency as an extinguishing agent stems from its great capacity for absorbing heat.

36. Refrigerant composition for absorption refrigerators

37. Natural gas liquefaction employing independent refrigerant path

38. Adiabatic refrigerant condenser controls system

39. Refrigerant evaporators, with and without cold accumulators, refrigerant expansion valves, parts for motor vehicles (included in class 12)

40. Condensers are made of aluminum and consist of a network of tubes for refrigerant flow, with fins to transfer the heat to the passing air.

41. Our PF ® refrigerant Condensers are highly efficient for condensing high-pressure refrigerant vapor into a liquid

42. Method of manufacturing y-shape refrigerant distributor for air conditioning and y-shape refrigerant distributor manufactured thereby

43. Refrigerant compressors, semi-hermetic refrigerant compressors, semi-hermetic piston compressors for refrigerating machines and air conditioning installations

44. Actual filling of refrigerant used for test kg

45. Vehicular cooling system using air conditioner refrigerant

46. The product of a solid element's relative atomic mass and its specific heat capacity is approximately

47. — cair is the specific heat capacity of air at constant pressure and density [kWh/(m3 K)];

48. Process and system for regulating the capacity of a compression heat pump and/or refrigerating machine

49. Application: Loadable heat insulation plate. For insulation under extremely high load-capacity concrete bases, protected with...

50. The Accumulator allows only a regulated amount of refrigerant oil and refrigerant gas to enter the AC compressor

51. A perimeter air conditioning system (6) is equipped with a refrigerant circuit which circulates a refrigerant and performs a vapor compression refrigeration cycle.

52. The present invention relates to an absorption cycle comprising a refrigerant pair comprising at least one refrigerant and at least one ionic liquid.

53. Actual filling of refrigerant used for test

54. Absorption refrigeration cycles using a lgwp refrigerant

55. A solar air-conditioning system that is preferably designed to operate with concentrated solar heat and uses a circulating refrigerant in a cycle of compression and expansion.

56. The system boundaries for measurement include the refrigerant cycle, the refrigerant pump and, for ad/absorption, in addition the sorption cycle and solvent pump.

57. 28 Water has a greater capacity to absorb heat than any other natural material except for ammonia.

58. The manufactured aggregate material (154) may be adjusted for moisture content, density, heat capacity, and other parameters.

59. A brief overview of Calorimetric reactions: A calorimeter contains water or other substances with known heat capacity

60. By the heat dissipation, the allowable power capacity of the existing aerial line (2) can be increased.

61. For long term consideration, natural refrigerant satisfied substitutes.

62. Option 2 – Refrigerant replacement with plant adjustments;

63. Absorption refrigeraton cycles using a lgwp refrigerant

64. Cathartics are also said to be refrigerant, when they greatly lessen the heat of the body, as the sulphate of soda, sulphate of magnesia, and supertartrate of potassa

65. Calorimeter, device for measuring the heat developed during a mechanical, electrical, or chemical reaction, and for calculating the heat capacity of materials. Calorimeters have been designed in …

66. ·K. The specific heat capacity varied with the aggregate source and ranged from 940 to 2000 J/kg

67. Low temperature heat capacity of ammonium, rubidium and cesium perbromates has been studied by method of adiabatic calorimetry.

68. Liquid refrigerant dropping apparatus for absorption type refrigerators

69. According to the present invention, a chiller comprises: a compressor configured to compress a refrigerant; a condenser configured to condense the refrigerant compressed by the compressor; an expander configured to expand the refrigerant condensed by the condenser; and an evaporator in which the refrigerant expanded by the expander cools cold water.

70. An example of an Azeotropic refrigerant is R502

71. The invention provides a method for enhancing the heat transfer capacity of latent heat type functionally thermal fluid by adopting a vortex enhanced tube and the vortex enhanced tube.

72. The air-conditioning Condenser is a radiator positioned between the car’s grille and the engine-cooling radiator in which the gaseous refrigerant sheds heat and returns to a liquid state.

73. In periodic flow atRa*H=4.4×1010 the wall heat capacity significantly reduces the amplitude of the temperature oscillation.

74. A calculation formula for determining the specific heat capacity of solid with an improved RD496-III microcalorimeter was derived.

75. HFC-134a is a relatively expensive refrigerant compared to its alternatives.

76. Engine-off air conditioner using refrigerant cycle of main air conditioner

77. This is the most popular refrigerant used in Chiller plants

78. The Accumulator must also contend with off cycle refrigerant migration

79. Residential geothermal heat pumps with a capacity of 10 kilowatt (kW) are routinely installed for around $1–3,000 per kilowatt.

80. Refrigerant enhancer-absorbent concentrator and turbo-charged absorption chiller